Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse - YZHIDIANF

Contact us for free:
Speak to our experts in 1 min
Provide quotation in 1 hour

Inquiry Now
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Last Updated:2026-10-29

Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse

Features
Product Category: Mass Air Flow Sensor (MAF)
OE Part Numbers: MR985187, MR-985187
Connector Configuration: 4-Pin Blade Terminal Socket
Mounting Configuration: Drop-In Probe Flange Mount
Operating Voltage Range: 9.0V – 16.0V DC
Operating Temperature Range: -40°C to +125°C (-40°F to +257°F)
Response Time: ≤ 15 milliseconds
Condition: New Aftermarket Replacement Component
Warranty: 12 Months

Introduction To MR985187 Air Flow MAF Sensor

MR-985187

The MR985187 is an OE-standard 4-pin drop-in Mass Air Flow (MAF) sensor featuring an integrated intake air temperature (IAT) sensor, Serving as a direct aftermarket replacement for MR985187 and E5T60171, this sensor is calibrated across a wide range of naturally aspirated, turbocharged, and V6 engine platforms. Key vehicle applications include for Mitsubishi Lancer (2008–2017 2.0L 4B11, 2.4L 4B12 & Ralliart/Evolution X Turbo), for Mitsubishi Outlander (2004–2013 2.4L 4G69 / 4B12 & 3.0L V6 6B31), for Mitsubishi Outlander Sport / ASX / RVR (2011–2019 2.0L/2.4L), for Mitsubishi Eclipse & Eclipse Spyder (2006–2012 2.4L 4G69 & 3.8L V6 6G75), for Mitsubishi Galant (2004–2012 2.4L / 3.8L), and for Mitsubishi Endeavor (2004–2011 3.8L V6).

The MR985187 utilizes micro-machined hot-film sensing technology paired with a fast-response NTC thermistor. By simultaneously measuring intake air mass volume and ambient intake air temperature, it delivers an ultra-precise linear analog output signal to the Engine Control Module (ECM). This real-time data enables the engine computer to compute exact air-fuel mixture ratios, manage variable valve timing (MIVEC), and adjust ignition advance curves.

Vehicle Compatibility & OE Reference List

Below is the full vehicle application scope and interchangeable OE part numbers for your quick reference.

Vehicle MakeVehicle ModelModel YearsDisplacement
MitsubishiLancer2008–20172.0L / 2.4L
MitsubishiOutlander2004–20132.4L / 3.0L
MitsubishiOutlander Sport / ASX / RVR2011–20192.0L / 2.4L
MitsubishiEclipse / Eclipse Spyder2006–20122.4L / 3.8L
MitsubishiGalant2004–20122.4L / 3.8L
MitsubishiEndeavor2004–20113.8L
OE Part NumbersMR985187 / MR-985187 / E5T60171

Compliance Notice: All vehicle brand names, model designations, and engine codes listed below are referenced strictly to provide technical fitment and compatibility information.

Wholesale Trading Terms

MOQ

Our MR985187 mass air flow maf sensor, standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.

Delivery Time

For all in-stock mass air flow maf sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 25 to 30 business days.

Warranty Policy

Mass air flow maf sensor MR985187, come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.

OEM & Private Label Service

Our branded packaging can be customized in terms of size, raw materials, and packaging processes to meet the needs of different regional markets. Furthermore, we offer flexible and reliable production partnerships for global wholesalers, distributors, bulk buyers, and trading companies. In short, we provide a one-stop private label service, including laser-engraved logos, customized product labels, sealed plastic bags, and color box printing.

OEM & Private Label

Professional Installation Guidelines

  1. Safety Preparation: Turn off the engine ignition switch and disconnect the negative battery cable before servicing electrical intake components.
  2. Locate the Sensor: On for Mitsubishi Lancer, Outlander, and Eclipse, locate the MR985187 drop-in probe inserted into the air filter housing upper lid or the intake duct.
  3. Disconnect Harness: Depress the locking tab on the 4-pin electrical connector and carefully pull straight to disconnect.
  4. Remove Fasteners: Remove the two retaining screws securing the sensor flange. Gently twist and pull the probe straight out.
  5. Inspect & Clean Housing: Wipe clean the mounting bore in the air cleaner cover. Ensure the new Viton O-ring is properly seated in the sensor groove.
  6. Install New Sensor: Insert the new MR985187 probe straight into the mounting hole. Reinstall the two retaining screws and tighten securely (do not over-torque).
  7. Reconnect & ECU Reset: Push the 4-pin harness connector firmly until the lock tab clicks. Reconnect the battery terminal, start the engine, allow it to idle for 5–10 minutes to relearn fuel trim parameters, and clear historical OBD trouble codes using a diagnostic scan tool.

Help Center

FAQ

Q1: What specific function does the MR985187 MAF sensor perform on for Mitsubishi MIVEC engines (such as 4B11, 4B12, and 6G75)?

For Mitsubishi MIVEC engines (2.0L 4B11, 2.4L 4B12, 3.8L 6G75) for Lancer, Outlander, Eclipse, and Galant, the MR985187 measures intake air mass and temp. The ECM uses this to calculate injection timing, optimize MIVEC, and manage ETCS. Drift causes air miscalculations, leading to sluggish acceleration, poor economy, and erratic idle.

MR985187 is a catalog part number for Mitsubishi, while E5T60171 is a production code printed on the sensor body. Both represent the same physical unit. They share the identical 4-pin blade terminal layout, mounting flange dimensions, bypass venturi structure, and voltage calibration curve.

  1. Always inspect the pre-installed Viton rubber O-ring to ensure it sits evenly in the probe flange groove. A pinched or missing O-ring will cause unmetered false air leaks and lean fuel trim codes.
  2. Insert the probe straight into the air cleaner housing mounting hole without forcing it against the plastic bore.
  3. Tighten the two retaining screws firmly by hand (do not over-tighten into the plastic housing).
  4. Inspect the engine air filter element; replace if it is contaminated or saturated with oil.
  • P0100: Mass Air Flow (MAF) Circuit Malfunction
  • P0101: Mass Air Flow (MAF) Circuit Range / Performance Problem
  • P0102: Mass Air Flow (MAF) Circuit Low Input
  • P0103: Mass Air Flow (MAF) Circuit High Input
  • P0112 / P0113: Intake Air Temperature (IAT) Sensor Circuit Low / High Input
  • P0171 / P0174: System Too Lean (Bank 1 / Bank 2)

Guides You Might Need

Related Products

Send Us Your Inquiry

Share part numbers, quantities and target market — we reply within 24 hours.

Please enable JavaScript in your browser to complete this form.

Your information is kept confidential and only used to reply to your inquiry.

GET A QUOTE

Have other questions for us?

Talk to our sales team directly for pricing, fitment checks, samples and private-label packaging.

See what our customers say

The company's service is very practical, due to the quality of the service and products, I have successfully grown in my small business, I thank your company, thank you to the employees, especially the Chinese people, thank you

5 star
customer logo
Mark Benson

The engine system parts are of good quality and good presentation, at a good price. The most beneficial aspect of your company is the customer service.

5 star
customer logo
Jordi Ros

Yes, your company does a great job and the sales people care about their customers, so your style makes our job great.

5 star
customer logo
Pauline Dionne

I am so grateful to Zhenhua Auto Parts for being my business partner. They always give me high quality auto parts and their supplies are always well trained.
They are very professional in purchasing auto parts and have friendly communication with customers. I am extremely satisfied with their service.

5 star
customer logo
Wilfredo Jimenez Jr

I am satisfied with the attention that Zhenhuaautoparts provides. It provides its customers. Something that I really like is the follow-up they do when the merchandise comes out. It is good. The quality of the engine system parts and fuel system partsis very good. So far I have not had any complaints from my customers. But it is always good to continue improving.

5 star
customer logo
Amanda Rieth

Regarding the professional auto parts that the company sells, it certified that they are of the highest quality. Marketing your company's products has brought very good benefits to my company, which has translated into growth. I am very satisfied with the seller and her products. I hope to continue doing so. Business with you for a long timereally thank you.

5 star
customer logo
Jack

YZHIDIANF auto parts team

Make our partners more successful
Get more and better opportunities with YZHIDIANF

  • Save cost & time

    Save cost & time

    Benefit from expertly engineered solutions designed to save you as much time and money as possible.

  • More reliability

    More reliability

    Get your auto parts from certified manufacturers for reliable results every single time.

  • Wise Investments

    Wise Investments

    Leave your customers with a lasting impression with solutions designed for brand impact and recognition.

  • Become sustainable

    Become sustainable

    Become a leader in sustainable development in the auto parts industry, and adhere to environmentally friendly principles in the entire process from production, packaging to transportation.

在此添加您的标题文本