Introduction To MR985187 Air Flow MAF Sensor


The MR985187 is an OE-standard 4-pin drop-in Mass Air Flow (MAF) sensor featuring an integrated intake air temperature (IAT) sensor, Serving as a direct aftermarket replacement for MR985187 and E5T60171, this sensor is calibrated across a wide range of naturally aspirated, turbocharged, and V6 engine platforms. Key vehicle applications include for Mitsubishi Lancer (2008–2017 2.0L 4B11, 2.4L 4B12 & Ralliart/Evolution X Turbo), for Mitsubishi Outlander (2004–2013 2.4L 4G69 / 4B12 & 3.0L V6 6B31), for Mitsubishi Outlander Sport / ASX / RVR (2011–2019 2.0L/2.4L), for Mitsubishi Eclipse & Eclipse Spyder (2006–2012 2.4L 4G69 & 3.8L V6 6G75), for Mitsubishi Galant (2004–2012 2.4L / 3.8L), and for Mitsubishi Endeavor (2004–2011 3.8L V6).
The MR985187 utilizes micro-machined hot-film sensing technology paired with a fast-response NTC thermistor. By simultaneously measuring intake air mass volume and ambient intake air temperature, it delivers an ultra-precise linear analog output signal to the Engine Control Module (ECM). This real-time data enables the engine computer to compute exact air-fuel mixture ratios, manage variable valve timing (MIVEC), and adjust ignition advance curves.
Vehicle Compatibility & OE Reference List
Below is the full vehicle application scope and interchangeable OE part numbers for your quick reference.
| Vehicle Make | Vehicle Model | Model Years | Displacement |
|---|---|---|---|
| Mitsubishi | Lancer | 2008–2017 | 2.0L / 2.4L |
| Mitsubishi | Outlander | 2004–2013 | 2.4L / 3.0L |
| Mitsubishi | Outlander Sport / ASX / RVR | 2011–2019 | 2.0L / 2.4L |
| Mitsubishi | Eclipse / Eclipse Spyder | 2006–2012 | 2.4L / 3.8L |
| Mitsubishi | Galant | 2004–2012 | 2.4L / 3.8L |
| Mitsubishi | Endeavor | 2004–2011 | 3.8L |
| OE Part Numbers | MR985187 / MR-985187 / E5T60171 | ||
Compliance Notice: All vehicle brand names, model designations, and engine codes listed below are referenced strictly to provide technical fitment and compatibility information.
Wholesale Trading Terms
MOQ
Our MR985187 mass air flow maf sensor, standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.
Delivery Time
For all in-stock mass air flow maf sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 25 to 30 business days.
Warranty Policy
Mass air flow maf sensor MR985187, come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.
OEM & Private Label Service
Our branded packaging can be customized in terms of size, raw materials, and packaging processes to meet the needs of different regional markets. Furthermore, we offer flexible and reliable production partnerships for global wholesalers, distributors, bulk buyers, and trading companies. In short, we provide a one-stop private label service, including laser-engraved logos, customized product labels, sealed plastic bags, and color box printing.


Professional Installation Guidelines
- Safety Preparation: Turn off the engine ignition switch and disconnect the negative battery cable before servicing electrical intake components.
- Locate the Sensor: On for Mitsubishi Lancer, Outlander, and Eclipse, locate the MR985187 drop-in probe inserted into the air filter housing upper lid or the intake duct.
- Disconnect Harness: Depress the locking tab on the 4-pin electrical connector and carefully pull straight to disconnect.
- Remove Fasteners: Remove the two retaining screws securing the sensor flange. Gently twist and pull the probe straight out.
- Inspect & Clean Housing: Wipe clean the mounting bore in the air cleaner cover. Ensure the new Viton O-ring is properly seated in the sensor groove.
- Install New Sensor: Insert the new MR985187 probe straight into the mounting hole. Reinstall the two retaining screws and tighten securely (do not over-torque).
- Reconnect & ECU Reset: Push the 4-pin harness connector firmly until the lock tab clicks. Reconnect the battery terminal, start the engine, allow it to idle for 5–10 minutes to relearn fuel trim parameters, and clear historical OBD trouble codes using a diagnostic scan tool.
Help Center
FAQ
Q1: What specific function does the MR985187 MAF sensor perform on for Mitsubishi MIVEC engines (such as 4B11, 4B12, and 6G75)?
For Mitsubishi MIVEC engines (2.0L 4B11, 2.4L 4B12, 3.8L 6G75) for Lancer, Outlander, Eclipse, and Galant, the MR985187 measures intake air mass and temp. The ECM uses this to calculate injection timing, optimize MIVEC, and manage ETCS. Drift causes air miscalculations, leading to sluggish acceleration, poor economy, and erratic idle.
Q2: Why are part numbers MR985187 and E5T60171 completely interchangeable?
MR985187 is a catalog part number for Mitsubishi, while E5T60171 is a production code printed on the sensor body. Both represent the same physical unit. They share the identical 4-pin blade terminal layout, mounting flange dimensions, bypass venturi structure, and voltage calibration curve.
Q3: What precautions should be taken when replacing the MR985187 sensor probe?
- Always inspect the pre-installed Viton rubber O-ring to ensure it sits evenly in the probe flange groove. A pinched or missing O-ring will cause unmetered false air leaks and lean fuel trim codes.
- Insert the probe straight into the air cleaner housing mounting hole without forcing it against the plastic bore.
- Tighten the two retaining screws firmly by hand (do not over-tighten into the plastic housing).
- Inspect the engine air filter element; replace if it is contaminated or saturated with oil.
Q4: What diagnostic trouble codes (DTCs) and engine symptoms are commonly caused by a contaminated or failing MR985187 sensor?
- P0100: Mass Air Flow (MAF) Circuit Malfunction
- P0101: Mass Air Flow (MAF) Circuit Range / Performance Problem
- P0102: Mass Air Flow (MAF) Circuit Low Input
- P0103: Mass Air Flow (MAF) Circuit High Input
- P0112 / P0113: Intake Air Temperature (IAT) Sensor Circuit Low / High Input
- P0171 / P0174: System Too Lean (Bank 1 / Bank 2)


















