036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L - YZHIDIANF

Contact us for free:
Speak to our experts in 1 min
Provide quotation in 1 hour

Inquiry Now
036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L
036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L
036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L
036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L
036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L
036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L
Last Updated:2026-10-22

036906051 Intake Manifold Pressure MAP Sensor for VW Audi Seat Skoda 1.2L 1.4L 1.6L

Features
Product Category: Manifold Absolute Pressure (MAP) Sensor
OEM Part Number: 036906051 / 036 906 051
Terminal / Pin Count: 4-Pin Blade Terminals
Pin Assignment Definition:
Pin 1: Intake Air Temperature (IAT) NTC Signal
Pin 2: Sensor Ground (GND)
Pin 3: +5.0V DC Reference Voltage Supply (Vcc)
Pin 4: Manifold Absolute Pressure (MAP) Analog Output (Vout)
Operating Voltage: 5.0V ± 0.1V DC (ECU Reference)
Pressure Sensing Range: 20 kPa – 115 kPa
Pressure Output Voltage: 0.4V to 4.65V Linear Analog Voltage
Temperature Sensing Range: -40°C to +125°C (-40°F to +257°F)
Mounting Style: 2-Hole Flange Mount
Housing Material: PBT-GF30 / PA66-GF30 Glass-Fiber Reinforced
Terminal Finish: High-Conductivity Anti-Corrosion Plated Brass
Manufacturing Standards: IATF 16949 / ISO 9001

Introduction to 036906051 MAP Sensor

0369980411 Manifold Absolute Pressure Sensor

The 036906051 Intake Manifold Absolute Pressure (MAP) sensor is a direct-fit replacement component engineered for Volkswagen Group (VAG) vehicles powered by 1.2L, 1.4L, and 1.6L engines. This sensor continuously monitors the pressure inside the intake manifold and transmits real-time data to the engine control unit (ECU), enabling precise calculation of air density and air mass flow rate. Accurate MAP readings are essential for correct fuel injection quantity, ignition timing, and overall engine efficiency.

This sensor is supplied with an integrated air temperature sensor, combining two critical measurements into a single OE-matched housing. It is manufactured to original equipment specifications and is suitable for both petrol and certain diesel applications for Audi vehicles, for SEAT vehicles, for Škoda vehicles, and for Volkswagen vehicles

Vehicle Compatibility & OE Reference List

Below is the full vehicle application scope and interchangeable OE part numbers for your quick reference.

Vehicle MakeVehicle ModelModel YearsDisplacement
VWGolf IV / Golf Variant1997–20051.4L / 1.6L
VWBora / Bora Variant1998–20051.4L / 1.6L
VWPolo III / Polo IV / Polo V1999–20121.2L / 1.4L
VWLupo1998–20051.0L / 1.4L / 1.6L
VWCaddy II / Caddy III2000–20101.4L
VWFox2005–20111.2L / 1.4L
VWNew Beetle2001–20101.4L
AudiA22000–20051.4L
SeatIbiza II / Ibiza III / Ibiza IV1999–20111.2L / 1.4L / 1.6L
SeatCordoba1999–20091.2L / 1.4L / 1.6L
SeatLeon1999–20061.4L / 1.6L
SeatToledo II1999–20061.4L / 1.6L
SeatArosa1997–20041.0L / 1.4L
SeatInca2000–20031.4L
SkodaFabia I / Fabia II1999–20141.2L / 1.4L / 1.6L
SkodaOctavia I2000–20101.4L
SkodaRoomster / Praktik2006–20151.2L / 1.4L
SkodaFelicia I / Felicia II1995–20011.3L / 1.6L
Reference Part Number036906051 / 036 906 051 / 036906051D / 036 906 051 D / 03D906051 / 03D 906 051 / 0279980411 / 0369980411

*Disclaimer: Vehicle make and model names are listed strictly to demonstrate part compatibility. Always verify original part numbers (e.g., 036906051 or 036906051D) or vehicle VIN prior to purchase.

Wholesale Trading Terms

MOQ

Our 036906051 map sensor standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.

Delivery Time

For all in-stock map sensors, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 15 to 20 business days.

Warranty Policy

036906051 map sensor come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.

Packaging

We use standard neutral white cardboard boxes for packaging by default. In addition, we can produce custom-colored cardboard boxes or branded outer packaging according to your individual needs.

Transportation

We partner with major international courier companies, including DHL, FedEx, and UPS. Therefore, we can arrange global shipping, covering almost all countries and regions.

Payment

We support a variety of secure payment methods, such as bank transfers, PayPal, and Western Union. For long-term clients, we can also negotiate flexible payment options.

OEM & Private Label Service

Our branded packaging can be customized in terms of size, raw materials, and packaging processes to meet the needs of different regional markets. Furthermore, we offer flexible and reliable production partnerships for global wholesalers, distributors, bulk buyers, and trading companies. In short, we provide a one-stop private label service, including laser-engraved logos, customized product labels, sealed plastic bags, and color box printing.

OEM & Private Label

Professional Installation Guidelines

  1. Safety First: Turn off the ignition, remove the key, and disconnect the vehicle’s negative battery terminal before disconnecting any engine wiring harness.
  2. Locate the Sensor: On for VW, for Audi, for Seat, and for Skoda 1.4L 16V and 1.2L engines, locate the MAP sensor fastened directly to the side or top of the intake manifold runner.
  3. Unharness & Unbolt: Gently release the plastic wiring harness locking tab to disconnect the 4-pin electrical connector. Remove the two retaining mounting screws.
  4. Inspect & Clean the Port: Gently pull out the old sensor. Inspect the mounting cavity for oil sludge or carbon buildup; clean the mating surface with sensor-safe cleaner and a lint-free cloth.
  5. Install New Sensor: Ensure the new fluororubber O-ring is properly seated in its groove on the probe. Lightly lubricate the O-ring with a drop of clean engine oil, insert the sensor squarely into the port, and tighten the two mounting screws evenly (torque to approx. 3.5 – 5.0 Nm).
  6. Reconnect & Clear Codes: Reconnect the 4-pin harness until you hear a secure click. Reconnect the battery, start the engine, verify smooth idle, and clear historical DTCs using an OBD-II diagnostic scanner.

Help Center

FAQ

Q1: How does the 036906051 sensor integrate both MAP and IAT functions through its 4-pin connector?

A: The 036906051 is a dual-function combined sensor. Instead of utilizing two separate sensors on the intake runner, it combines a piezoresistive silicon pressure element (MAP) and an NTC thermistor (IAT) inside one probe.

A: faulty 036906051 sensor commonly sets P0105–P0108 (MAP circuit/range/low/high) and P0112/P0113 (IAT circuit low/high). Symptoms include rough idle, stalling at stops, delayed throttle response, high fuel consumption, rich exhaust odor, and EPC / Check Engine Light.

A: While the 036906051 sensor is an electrical plug-and-play component that works immediately upon connection, modern VAG ECUs store long-term fuel trim (LTFT) and idle control adaptation values. If the engine has been running with a corrupted MAP reading for an extended period, performing an ECU memory reset (clearing fault codes) and an Electronic Throttle Body Basic Setting / Alignment (using VCDS / OBD scanner on Group 060 or Group 098) will ensure a smooth idle and instant driving recovery.

A: individual inner white/neutral box, and heavy-duty export master cartons. Custom brand packaging and private labeling are available for bulk orders. Standard MOQ is 10 pcs, with sample evaluation orders supported.

Guides You Might Need

Related Products

Send Us Your Inquiry

Share part numbers, quantities and target market — we reply within 24 hours.

Please enable JavaScript in your browser to complete this form.

Your information is kept confidential and only used to reply to your inquiry.

GET A QUOTE

Have other questions for us?

Talk to our sales team directly for pricing, fitment checks, samples and private-label packaging.

See what our customers say

The company's service is very practical, due to the quality of the service and products, I have successfully grown in my small business, I thank your company, thank you to the employees, especially the Chinese people, thank you

5 star
customer logo
Mark Benson

The engine system parts are of good quality and good presentation, at a good price. The most beneficial aspect of your company is the customer service.

5 star
customer logo
Jordi Ros

Yes, your company does a great job and the sales people care about their customers, so your style makes our job great.

5 star
customer logo
Pauline Dionne

I am so grateful to Zhenhua Auto Parts for being my business partner. They always give me high quality auto parts and their supplies are always well trained.
They are very professional in purchasing auto parts and have friendly communication with customers. I am extremely satisfied with their service.

5 star
customer logo
Wilfredo Jimenez Jr

I am satisfied with the attention that Zhenhuaautoparts provides. It provides its customers. Something that I really like is the follow-up they do when the merchandise comes out. It is good. The quality of the engine system parts and fuel system partsis very good. So far I have not had any complaints from my customers. But it is always good to continue improving.

5 star
customer logo
Amanda Rieth

Regarding the professional auto parts that the company sells, it certified that they are of the highest quality. Marketing your company's products has brought very good benefits to my company, which has translated into growth. I am very satisfied with the seller and her products. I hope to continue doing so. Business with you for a long timereally thank you.

5 star
customer logo
Jack

YZHIDIANF auto parts team

Make our partners more successful
Get more and better opportunities with YZHIDIANF

  • Save cost & time

    Save cost & time

    Benefit from expertly engineered solutions designed to save you as much time and money as possible.

  • More reliability

    More reliability

    Get your auto parts from certified manufacturers for reliable results every single time.

  • Wise Investments

    Wise Investments

    Leave your customers with a lasting impression with solutions designed for brand impact and recognition.

  • Become sustainable

    Become sustainable

    Become a leader in sustainable development in the auto parts industry, and adhere to environmentally friendly principles in the entire process from production, packaging to transportation.

在此添加您的标题文本