Introduction to 18919-AM810 Throttle Position Sensor (TPS)
Drive-by-Wire Electronic Throttle Position Precision
In modern drive-by-wire (DBW) engine management systems, the 18919-AM810 Accelerator Pedal Position Sensor serves as the vital link between driver throttle input and electronic throttle body operation. As the pedal is depressed, internal contact brushes sweep along dual resistance tracks, generating two independent voltage curves (Signal 1 & Signal 2). The engine control module (ECM) continuously monitors both signals for consistency.
When aging or worn sensors develop dead spots or resistance drift, signal correlation fails, triggering immediate check engine illumination and forcing the engine into a protective limp-in / fail-safe mode (limiting RPM to ~2,000–2,500 RPM). Replacing the faulty sensor with our OE-spec 18919-AM810 unit completely restores crisp throttle response and normal vehicle drivability without needing to replace the expensive complete metal pedal assembly.
Vehicle Compatibility & OE Reference List
Below is the full vehicle application scope and interchangeable OE part numbers for your quick reference.
| Make | Model | Chassis / Series | Model Years | Engine | Displacement |
|---|---|---|---|---|---|
| Nissan | 350Z | Z33 (Coupe / Roadster) | 2003–2009 | VQ35DE / VQ35HR | 3.5L V6 |
| Infiniti | G35 | V35 (Sedan & Coupe) | 2003–2008 | VQ35DE | 3.5L V6 |
| Infiniti | FX35 | S50 (SUV) | 2003–2008 | VQ35DE | 3.5L V6 |
| Infiniti | FX45 | S50 (SUV) | 2003–2008 | VK45DE | 4.5L V8 |
| Infiniti | M35 | Y50 (Sedan) | 2006–2008 | VQ35DE | 3.5L V6 |
| Infiniti | M45 | Y50 (Sedan) | 2006–2008 | VK45DE | 4.5L V8 |
| Nissan | X-Trail | T30 | 2001–2007 | QR20DE / QR25DE | 2.0L / 2.5L |
| Nissan | Primera | P12 | 2002–2008 | QR20DE / QR25DE | 2.0L / 2.5L |
*Note: Always cross-check the existing sensor’s part number stamped on the plastic housing (e.g. 18919-AM810 or 18919-6N201) and pin count before ordering.
Cross-Reference & Interchange Part Numbers
| Reference Type | Part Number / Code |
|---|---|
| Nissan / Infiniti OE Numbers | 18919-AM810, 18919-6N201, 18919-VK500, 18919-5Y700, 18919-5Y000 |
| Marking / Sub-Numbers | 3F-18919-AM810, 89441-5290B |
| Associated Pedal Assemblies | 18002-AM81D, 18002-AM81E, 18002-AM811, 18002-AM810 |
Wholesale Trading Terms
MOQ
Our 18919-AM810 accelerator pedal position sensor (TPS) standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.
Delivery Time
For all in-stock throttle position sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 20 to 25 business days.
Warranty Policy
18919-AM810 tps sensor come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.
Packaging
We use standard neutral white cardboard boxes for packaging by default. In addition, we can produce custom-colored cardboard boxes or branded outer packaging according to your individual needs.
Transportation
We partner with major international courier companies, including DHL, FedEx, and UPS. Therefore, we can arrange global shipping, covering almost all countries and regions.
Payment
We support a variety of secure payment methods, such as bank transfers, PayPal, and Western Union. For long-term clients, we can also negotiate flexible payment options.
OEM & Private Label Service
Our packaging solutions can be customized in size, material, and production process to meet the needs of different regional markets. We also offer flexible, reliable manufacturing partnerships for wholesalers, distributors, bulk buyers, and trading companies worldwide. In short, we provide one-stop private-label (OEM) services, covering laser printing your own part numbers, custom color packaging, inner poly bags, barcode labels, and custom outer cartons.
Common Diagnostic Trouble Codes (DTCs)
Installing a replacement 18919-AM810 sensor resolves the following standard OBD-II diagnostic fault codes:
- P2138: Throttle/Pedal Position Sensor/Switch “D” / “E” Voltage Correlation Error
- P2122: Accelerator Pedal Position Sensor 1 Circuit Low Input
- P2123: Accelerator Pedal Position Sensor 1 Circuit High Input
- P2127: Accelerator Pedal Position Sensor 2 Circuit Low Input
- P2128: Accelerator Pedal Position Sensor 2 Circuit High Input
Easy Installation & ECU Re-Learn Procedure
- Step 1: Disconnect the negative battery terminal and unplug the factory 6-pin wiring harness from the pedal sensor.
- Step 2: Remove the two mounting screws securing the old sensor to the pedal bracket and install the new 18919-AM810 sensor.
- Step 3: Reconnect the wiring plug and reconnect the battery.
- Step 4 (Recommended): Perform the standard Nissan/Infiniti “Accelerator Pedal Released Position Learning” and “Throttle Valve Closed Position Learning” procedures using a diagnostic scan tool or manual pedal sequence to ensure perfect idle and throttle calibration.
Help Center
FAQ
Q1: Is 18919-AM810 the sensor only, or the whole pedal assembly?
A: This product is the standalone 6-pin electronic sensor unit. It allows repair shops and vehicle owners to replace just the failed sensor rather than purchasing the significantly more expensive entire metal pedal assembly (e.g. 18002-AM81D).
Q2: Is 18919-AM810 identical to 18919-6N201 and 18919-VK500?
A: Yes. In the Nissan/Infiniti parts catalog and aftermarket interchange databases, 18919-6N201 and 18919-VK500 are direct functional equivalents sharing the same 6-pin connector geometry, mounting hole layout, and electrical output characteristics.
Q3: What is the connector configuration?
A: It features a standard 6-pin blade terminal connector housed in high-durability polymer with a secure locking tab to prevent vibration-induced disconnects.
Q4: What is your Minimum Order Quantity (MOQ) and packaging?
A: Standard wholesale MOQ is 10 pieces. Units are individually packaged in protective bubble wrap and neutral inner boxes. Custom color packaging, brand stickers, and laser logo etching are available for volume B2B orders.
