Introduction to Crankshaft Position Sensor 3611030-EG01
The Crankshaft Position Sensor 3611030EG01 is a direct-fit OEM replacement for Great Wall Haval H6, H2, M4, and Voleex C30. It monitors crankshaft position and rotational speed in real time, transmitting precise timing data to the ECU for accurate ignition and fuel delivery. Built to factory specifications under OE numbers 3611030EG01 and 3611030-EG01, this Crankshaft Position Sensor drops into the original mounting location with no modifications. The sealed connector and high-temperature housing maintain stable signal output across cold starts, hot idle, and sustained highway operation.
Parameter Table of Crankshaft Position Sensor 3611030-EG01
| Parameter | Detail |
|---|---|
| Nomor Bagian | 3611030EG01 |
| Cross Reference | 3611030-EG01 |
| Merek | YZHIDIANF |
| Jenis | Sensor Posisi Poros Engkol |
| Aplikasi Kendaraan | For Great Wall Haval H6 / H2 / M4 / Voleex C30 |
| Product Fit | Direct Fit |
| Signal Output | Digital signal |
| Jenis Konektor | Konektor tertutup standar OEM |
| Bahan | Casing tahan suhu tinggi dengan kontak yang tahan korosi |
| Garansi | Garansi 12 Bulan |
| Waktu Pengiriman | 3-7 Days |
| Ketentuan Pembayaran | T/T, Western Union, PayPal |
Why Choose Our Crankshaft Position Sensor 3611030-EG01
Direct Plug-and-Play Fit for Great Wall Vehicles
The 3611030EG01 matches the original Crankshaft Position Sensor in mounting dimensions, connector shape, pinout, and electrical output. It fits Haval H6, H2, M4, and Voleex C30 with no rewiring, no adapter harnesses, and no modifications. Remove the old sensor, bolt this one in, reconnect the harness, and the job is done.
Precise Crankshaft Position Data Across All RPM Ranges
The sensing element captures crankshaft angle and rotational speed with tight tolerance from idle through highway speeds. Clean, accurate data lets the ECU set fuel injection quantity and spark timing precisely under all driving conditions. This Crankshaft Position Sensor holds its calibration, keeping timing accurate mile after mile.
Reliable Performance in Harsh Conditions
The sensor housing handles extreme heat soak, sub-zero cold starts, continuous vibration, and prolonged oil and moisture exposure. Internal shielding blocks electromagnetic interference that can corrupt the signal on economy-grade sensors. The sealed connector keeps dust, water, and road debris away from the terminals.
Digital Signal Output for Fast ECU Communication
This Crankshaft Position Sensor outputs a digital signal rather than an analog waveform. Digital output means the ECU reads position data faster and with lower susceptibility to electrical noise from the ignition system or alternator. Clean, rapid communication keeps fuel trim and spark timing precise in all engine operating modes.
Built to Factory Specifications
Every 3611030EG01 is produced to OEM dimensional and electrical specs. The housing, connector, and internal electronics match the original Great Wall part. This Crankshaft Position Sensor works straight out of the box, without the fitment gaps or early failures common in generic replacements.
12-Month Warranty with Fast Global Shipping
Every Crankshaft Position Sensor 3611030EG01 ships within 3 to 7 days and is covered by a 12-month warranty against manufacturing defects. T/T, Western Union, and PayPal accepted.
