Introduction To MR299300 MAP Sensor
について MR299300 is an OEM-standard 3-pin intake manifold absolute pressure (MAP) / boost pressure sensor engineered for turbo-diesel applications. It is designed to deliver real-time manifold pressure data to the ECU/ECM, supporting precise air-fuel metering, stable turbo boost modulation, and efficient combustion on turbocharged engines.
Primary fitment is concentrated for Mitsubishi turbo-diesel platforms, including for the Pajero / Montero (V60, V3W, V6W, and related generations), for the L200 / Triton (K60T, K74T), and for the Pajero Sport / Montero Sport equipped with 2.5 TD / 2.5 TDi and 3.2 DiD engines. It is also commonly listed for the Volvo S40 and V40 in cross-reference catalogs; buyers are advised to confirm fitment against the original OE number before ordering.
Common failure symptoms addressed by this replacement include rough idle, hard starting (particularly when warm), hesitation or flat spots under acceleration, increased fuel consumption, and an illuminated check engine light. Related diagnostic trouble codes frequently include P0106 (MAP circuit range/performance), P0107 (MAP circuit low input), and P0108 (MAP circuit high input).
対応車種および純正部品対応リスト
以下に、車両ごとの適用範囲の全一覧および互換性のある純正部品番号を、ご参照用に掲載します。.
| 三菱 | Pajero II / Pajero III | 1997–2007 | 2.5L TD / 3.2L Di-D / 3.0L / 3.5L |
|---|---|---|---|
| 三菱 | Montero / Montero Sport | 1998–2008 | 3.0L / 3.5L V6 / 2.5L TD |
| 三菱 | Pajero Sport I | 1998–2008 | 2.5L TD / 3.0L V6 |
| 三菱 | L200 III / IV Pickup | 1996–2007 | 2.5L TD / 4WD |
| 三菱 | Shogun / Shogun Sport | 1998–2006 | 2.5L TD / 3.2L Di-D / 3.0L |
| 三菱 | チャレンジャー | 1998–2008 | 3.0L V6 / 2.5L TD |
| 三菱 | Galant VIII / Galant Estate | 1996–2004 | 2.0L / 2.4L GDI / 2.5L V6 |
| 三菱 | Space Runner / Space Wagon | 1998–2004 | 2.0L / 2.4L GDI |
| 三菱 | Carisma | 1997–2006 | 1.8L GDI / 1.8L 16V |
| ボルボ | S40 I | 1998–2004 | 1.8i GDI |
| ボルボ | V40 I Estate | 1998–2004 | 1.8i GDI |
| Smart | Forfour | 2004–2006 | 1.5L Petrol |
| OEM Part Number | MR299300 / MR-299300 / E1T16671A / E1T16671 / J5T25871 | ||
Note: All vehicle brand names and model designations below are referenced strictly for technical fitment and compatibility verification.
卸売取引条件
最小発注数量（MOQ）
Our MR299300 intake manifold absolute pressure map sensor standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.
納期
For all in-stock intake manifold absolute pressure map sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 20 to 25 business days.
保証規定
MR299300 intake manifold absolute pressure map sensor come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.
パッケージ
通常、梱包には標準的なニュートラルホワイトの段ボール箱を使用しています。また、お客様のご要望に応じて、特注色の段ボール箱やブランドロゴ入りの外装箱も製作可能です。.
交通
当社は、DHL、FedEx、UPSをはじめとする主要な国際宅配便会社と提携しています。そのため、ほぼすべての国や地域を対象とした世界中への配送を手配することが可能です。.
お支払い
当サイトでは、銀行振込、PayPal、ウェスタンユニオンなど、さまざまな安全な支払い方法に対応しています。長期間ご利用いただいているお客様には、柔軟な支払い条件についてもご相談に応じます。.
OEMおよびプライベートブランドサービス
当社のブランドパッケージは、各地域の市場のニーズに合わせて、サイズ、原材料、包装工程などをカスタマイズすることが可能です。さらに、世界中の卸売業者、販売代理店、大口購入者、商社に対し、柔軟かつ信頼性の高い生産パートナーシップを提供しています。 つまり、レーザー彫刻によるロゴ、カスタマイズされた製品ラベル、密封プラスチック袋、カラーボックスの印刷など、ワンストップのプライベートブランドサービスを提供しています。.
Professional Installation & Diagnostic Guidelines
- Pre-Installation Safety: Turn off the engine ignition switch and disconnect the vehicle’s negative battery terminal before disconnecting any electrical wiring.
- Locate the Sensor: Find the MR299300 sensor mounted on the firewall, inner fender apron, or intake manifold bracket on for Mitsubishi Pajero, Montero, L200, or Galant models.
- Inspect Vacuum Line: Carefully disconnect the rubber vacuum hose from the sensor nipple. Check the hose for splits, hardening, soft spots, or internal oil sludge clogging. Replace damaged vacuum tubing.
- Disconnect & Unbolt: Squeeze the locking tab on the 3-pin electrical connector and disconnect the wiring harness. Remove the single mounting bolt securing the metal bushing bracket.
- 新しいセンサーの取り付け: Fasten the new MR299300 sensor using the original mounting bolt (torque to approx. 6.0 – 8.0 Nm). Reattach the vacuum hose firmly onto the barb port, ensuring a tight leak-free fit.
- Reconnect & Clear Codes: Connect the 3-pin wiring harness until the latch clicks securely. Reconnect the battery terminal, start the engine, verify smooth idle operation, and use an OBD-II diagnostic scanner to clear any stored historical DTCs.
ヘルプセンター
よくあるご質問
Q1: How is the MR299300 sensor mounted and connected compared to manifold push-in sensors?
A: Unlike push-in MAP sensors that seat directly into a hole in the intake plenum with an O-ring, the MR299300 uses a remote bracket mount with a single metal-sleeved bolt hole. It is fastened to the vehicle’s firewall or an intake bracket and connected to the intake manifold vacuum port via a flexible rubber vacuum hose. This remote design protects the sensing diaphragm from direct manifold heat soak and excessive crankcase oil accumulation.
Q2: What specific OBD-II diagnostic fault codes (DTCs) indicate a failing MR299300 sensor?
Q3: Are part numbers MR299300, E1T16671, and E1T16671A completely interchangeable?
A: MR299300 is a widely referenced part number for Mitsubishi applications, while E1T16671A, E1T16671, and E001T16671A are alternative cross-reference numbers commonly associated with this sensor. They share identical 3-pin electrical pinouts, mounting dimensions, pressure response curves, and vacuum nipple fittings.
