Introduction to Car Intake Manifold Air Pressure Sensor
Zhenhua Auto Parts Company’s Car Intake Manifold Air Pressure Sensor is specially designed for Chery, Changan, Geely and other vehicles. The brand is YZHIDIANF, which adopts Direct Fit design to ensure perfect matching with the vehicle and easy installation.
Advantages of Car Intake Manifold Air Pressure Sensor
1. Accurate measurement: It can accurately detect the air pressure in the intake manifold, provide accurate data for the engine control unit, and ensure the accuracy of engine operation.
2. Reliable quality: manufactured according to factory specifications, with high quality standards and stable performance, which can effectively reduce the probability of failure and prolong the service life.
Benefits of Car Intake Manifold Air Pressure Sensor
1. Improve fuel economy: With accurate measurement and data, help the engine to better control the fuel injection quantity and ignition timing, thus improving fuel utilization efficiency, saving fuel consumption and reducing the use cost of the owner.
2. Enhance power performance: By reasonably adjusting the fuel injection quantity and ignition timing of the engine, the output power of the engine can be effectively increased, the power performance of the vehicle can be improved, and the driving experience can be better.
3. Reduce environmental pollution: Help the engine to control accurately, reduce the emission of harmful substances, help protect the environment, and meet the requirements of modern society for environmental protection.
申し込み
It is suitable for Chery, Chana, Geely and other vehicles, and provides key intake pressure data monitoring for the engines of these vehicles to ensure the normal and efficient operation of the engines.
Operation Guidance
The installation steps are relatively simple, usually just remove the old sensor, and then install the product in the correct position and connect the relevant lines. For detailed operation steps, please refer to the relevant installation guide articles on the official website of Zhenhua Auto Parts Company.
よくあるご質問
About working principle
1. What is the working principle of the car intake manifold air pressure sensor？
It mainly works based on piezoresistive effect. When the pressure in the car intake manifold acts on the sensitive element (usually silicon diaphragm) of the sensor, the diaphragm will be deformed, and then the resistance value on the diaphragm will be changed. Through the Wheatstone bridge circuit, the change of resistance value is converted into an electrical signal, which is amplified and processed, and then transmitted to the electronic control unit (ECU) of the automobile. Based on this signal, the ECU can know the air intake of the engine, so as to accurately control the fuel injection amount and ignition timing, and ensure the efficient operation of the engine.
About use
2. How to judge whether the car intake manifold air pressure sensor is faulty?
Common signs of failure include difficulty in starting the engine, because sensor failure may lead to inaccurate fuel injection, too rich or too lean mixture; The idle speed is unstable, and the pressure signal error makes ECU unable to maintain stable idle speed; The acceleration is weak, and the wrong intake information limits the engine power output; The fuel consumption rises abnormally, and the unreasonable fuel supply causes waste. In addition, the fault light is on, and the fault code is read by the on-board diagnostic system (OBD). If it points to the intake manifold air pressure sensor, it is also an important prompt.
About effect
3. Will the failure of the car intake manifold air pressure sensor affect the exhaust emission?
It will have a significant impact. Due to the sensor failure, the air intake measurement is inaccurate, the fuel injection cannot be accurately matched, and the mixture ratio is out of balance. When the mixture is too rich, the combustion is incomplete, and the contents of carbon monoxide (CO) and hydrocarbons (HC) in the tail gas increase greatly. If the mixture is too thin, the emission of nitrogen oxides (NOx) will increase, which will cause the automobile exhaust to exceed the standard, fail to pass the environmental protection test and pollute the environment.
About warning
4. What should I pay attention to when replacing the car intake manifold air pressure sensor?
First of all, make sure to choose the genuine sensor that adapts to the vehicle model. The sensor parameters and interfaces of different vehicles may be different. Before removing the old sensor, it is necessary to disconnect the negative pole of the vehicle power supply to prevent short circuit or damage to electronic components. When installing, pay attention to the correct installation position and direction of the sensor. After installation, clear the fault code, then start the vehicle, observe the engine running state, idling stability, etc. If necessary, calibrate the sensor with a professional diagnostic instrument.
About maintenance
5. What factors may lead to premature damage of the car intake manifold air pressure sensor?
Long-term exposure to high temperature and humidity, such as poor heat dissipation in engine compartment and moisture accumulation, will erode the internal circuits and components of the sensor; The air intake system leaks, and a large number of unfiltered impurities and dust enter the air intake manifold and attach to the sensitive parts of the sensor, causing wear or blockage; The vehicle is subjected to severe vibration and collision, which may loosen and damage the internal structure of the sensor; There are also voltage spikes and surges in the electrical system, such as abnormal voltage caused by generator failure, which are also easy to impact and damage the sensor.
