Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse - YZHIDIANF

お問い合わせは無料です:
1分でエキスパートと話す
1時間以内に見積もりを提出

お問い合わせ
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
最終更新日2026-10-29

Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse

特徴
Product Category: Mass Air Flow Sensor (MAF)
OE Part Numbers: MR985187, MR-985187
Connector Configuration: 4-Pin Blade Terminal Socket
Mounting Configuration: Drop-In Probe Flange Mount
Operating Voltage Range: 9.0V – 16.0V DC
Operating Temperature Range: -40°C to +125°C (-40°F to +257°F)
Response Time: ≤ 15 milliseconds
Condition: New Aftermarket Replacement Component
Warranty: 12 Months

Introduction To MR985187 Air Flow MAF Sensor

MR-985187

について MR985187 is an OE-standard 4-pin drop-in Mass Air Flow (MAF) sensor featuring an integrated intake air temperature (IAT) sensor, Serving as a direct aftermarket replacement for MR985187 そして E5T60171, this sensor is calibrated across a wide range of naturally aspirated, turbocharged, and V6 engine platforms. Key vehicle applications include for Mitsubishi Lancer (2008–2017 2.0L 4B11, 2.4L 4B12 & Ralliart/Evolution X Turbo), for Mitsubishi Outlander (2004–2013 2.4L 4G69 / 4B12 & 3.0L V6 6B31), for Mitsubishi Outlander Sport / ASX / RVR (2011–2019 2.0L/2.4L), for Mitsubishi Eclipse & Eclipse Spyder (2006–2012 2.4L 4G69 & 3.8L V6 6G75), for Mitsubishi Galant (2004–2012 2.4L / 3.8L), and for Mitsubishi Endeavor (2004–2011 3.8L V6).

The MR985187 utilizes micro-machined hot-film sensing technology paired with a fast-response NTC thermistor. By simultaneously measuring intake air mass volume and ambient intake air temperature, it delivers an ultra-precise linear analog output signal to the Engine Control Module (ECM). This real-time data enables the engine computer to compute exact air-fuel mixture ratios, manage variable valve timing (MIVEC), and adjust ignition advance curves.

対応車種および純正部品対応リスト

以下に、車両ごとの適用範囲の全一覧および互換性のある純正部品番号を、ご参照用に掲載します。.

Vehicle Make車種モデル年Displacement
三菱Lancer2008–20172.0L / 2.4L
三菱Outlander2004–20132.4L / 3.0L
三菱Outlander Sport / ASX / RVR2011–20192.0L / 2.4L
三菱Eclipse / Eclipse Spyder2006–20122.4L / 3.8L
三菱Galant2004–20122.4L / 3.8L
三菱Endeavor2004–20113.8L
OE Part NumbersMR985187 / MR-985187 / E5T60171

Compliance Notice: All vehicle brand names, model designations, and engine codes listed below are referenced strictly to provide technical fitment and compatibility information.

卸売取引条件

最小発注数量(MOQ)

Our MR985187 mass air flow maf sensor, standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.

納期

For all in-stock mass air flow maf sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 25 to 30 business days.

保証規定

Mass air flow maf sensor MR985187, come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.

OEMおよびプライベートブランドサービス

当社のブランドパッケージは、各地域の市場のニーズに合わせて、サイズ、原材料、包装工程などをカスタマイズすることが可能です。さらに、世界中の卸売業者、販売代理店、大口購入者、商社に対し、柔軟かつ信頼性の高い生産パートナーシップを提供しています。 つまり、レーザー彫刻によるロゴ、カスタマイズされた製品ラベル、密封プラスチック袋、カラーボックスの印刷など、ワンストップのプライベートブランドサービスを提供しています。.

OEMおよびプライベートブランド

Professional Installation Guidelines

  1. Safety Preparation: Turn off the engine ignition switch and disconnect the negative battery cable before servicing electrical intake components.
  2. Locate the Sensor: On for Mitsubishi Lancer, Outlander, and Eclipse, locate the MR985187 drop-in probe inserted into the air filter housing upper lid or the intake duct.
  3. Disconnect Harness: Depress the locking tab on the 4-pin electrical connector and carefully pull straight to disconnect.
  4. Remove Fasteners: Remove the two retaining screws securing the sensor flange. Gently twist and pull the probe straight out.
  5. Inspect & Clean Housing: Wipe clean the mounting bore in the air cleaner cover. Ensure the new Viton O-ring is properly seated in the sensor groove.
  6. 新しいセンサーの取り付け: Insert the new MR985187 probe straight into the mounting hole. Reinstall the two retaining screws and tighten securely (do not over-torque).
  7. Reconnect & ECU Reset: Push the 4-pin harness connector firmly until the lock tab clicks. Reconnect the battery terminal, start the engine, allow it to idle for 5–10 minutes to relearn fuel trim parameters, and clear historical OBD trouble codes using a diagnostic scan tool.

ヘルプセンター

よくあるご質問

Q1: What specific function does the MR985187 MAF sensor perform on for Mitsubishi MIVEC engines (such as 4B11, 4B12, and 6G75)?

For Mitsubishi MIVEC engines (2.0L 4B11, 2.4L 4B12, 3.8L 6G75) for Lancer, Outlander, Eclipse, and Galant, the MR985187 measures intake air mass and temp. The ECM uses this to calculate injection timing, optimize MIVEC, and manage ETCS. Drift causes air miscalculations, leading to sluggish acceleration, poor economy, and erratic idle.

MR985187 is a catalog part number for Mitsubishi, while E5T60171 is a production code printed on the sensor body. Both represent the same physical unit. They share the identical 4-pin blade terminal layout, mounting flange dimensions, bypass venturi structure, and voltage calibration curve.

  1. Always inspect the pre-installed Viton rubber O-ring to ensure it sits evenly in the probe flange groove. A pinched or missing O-ring will cause unmetered false air leaks and lean fuel trim codes.
  2. Insert the probe straight into the air cleaner housing mounting hole without forcing it against the plastic bore.
  3. Tighten the two retaining screws firmly by hand (do not over-tighten into the plastic housing).
  4. Inspect the engine air filter element; replace if it is contaminated or saturated with oil.
  • P0100: Mass Air Flow (MAF) Circuit Malfunction
  • P0101: Mass Air Flow (MAF) Circuit Range / Performance Problem
  • P0102: Mass Air Flow (MAF) Circuit Low Input
  • P0103: Mass Air Flow (MAF) Circuit High Input
  • P0112 / P0113: Intake Air Temperature (IAT) Sensor Circuit Low / High Input
  • P0171 / P0174: System Too Lean (Bank 1 / Bank 2)

必要なガイド

関連商品

Send Us Your Inquiry

Share part numbers, quantities and target market — we reply within 24 hours.

このフォームを入力するには、ブラウザのJavaScriptを有効にしてください。.

Your information is kept confidential and only used to reply to your inquiry.

GET A QUOTE

他にご質問はありますか?

Talk to our sales team directly for pricing, fitment checks, samples and private-label packaging.

お客様の声を見る

会社のサービスは非常に実用的で、サービスや製品の品質のために、私は正常に私の小さなビジネスで成長している、私はあなたの会社に感謝し、従業員、特に中国の人々に感謝し、ありがとうございました。

5つ星
カスタマーロゴ
マーク・ベンソン

エンジンシステムの部品は、良い品質と良いプレゼンテーションで、良い価格です。貴社の最も有益な側面は、顧客サービスです。.

5つ星
カスタマーロゴ
ジョルディ・ロス

そうですね、御社は素晴らしい仕事をしていますし、営業担当者も顧客を大切にしているので、御社のスタイルが私たちの仕事を素晴らしいものにしてくれています。.

5つ星
カスタマーロゴ
ポーリン・ディオンヌ

私のビジネスパートナーである振華汽車零部件にとても感謝しています。彼らはいつも私に高品質の自動車部品を与え、彼らの供給は常によく訓練されています。.
彼らは自動車部品の購入において非常にプロフェッショナルで、顧客とのコミュニケーションもフレンドリーです。彼らのサービスには非常に満足しています。.

5つ星
カスタマーロゴ
ウィルフレド・ヒメネスJr

私はZhenhuaautopartsが提供する気配りに満足しています。それは顧客に提供しています。本当に気に入っているのは、商品が出てきたときのフォローアップです。それは良いことです。エンジン系統の部品と燃料系統の部品の品質はとても良いです。今のところ、顧客からクレームを受けたことはない。しかし、常に改善し続けることは良いことです。.

5つ星
カスタマーロゴ
アマンダ・リース

御社が販売しているプロ仕様の自動車部品については、最高品質であることが証明されています。御社の製品を販売することは、私の会社に非常に良い利益をもたらし、それが成長につながりました。私は販売者とその製品に非常に満足しています。これからも続けていきたいと思っています。本当にありがとうございました。.

5つ星
カスタマーロゴ
ジャック

YZHIDIANF自動車部品チーム

パートナーを成功に導く
YZHIDIANFでより多くの、より良い機会を得る

  • コストと時間の節約

    コストと時間の節約

    可能な限り時間とコストを節約できるよう設計された、専門家によるソリューションをご利用ください。.

  • より高い信頼性

    より高い信頼性

    自動車部品は、常に信頼できる結果を得るために、認定されたメーカーから入手しましょう。.

  • ワイズ・インベストメンツ

    ワイズ・インベストメンツ

    ブランドのインパクトと認知度を高めるためにデザインされたソリューションで、お客様の印象を末永く残しましょう。.

  • 持続可能になる

    持続可能になる

    自動車部品業界における持続可能な開発のリーダーとなり、生産、包装、輸送に至る全過程において環境に優しい原則を遵守する。.

在此添加您的标题文本