Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse - YZHIDIANF

Póngase en contacto con nosotros gratuitamente:
Hable con nuestros expertos en 1 minuto
Presupuesto en 1 hora

Consulta
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Última actualización:2026-10-29

Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse

Características
Product Category: Mass Air Flow Sensor (MAF)
OE Part Numbers: MR985187, MR-985187
Connector Configuration: 4-Pin Blade Terminal Socket
Mounting Configuration: Drop-In Probe Flange Mount
Operating Voltage Range: 9.0V – 16.0V DC
Operating Temperature Range: -40°C to +125°C (-40°F to +257°F)
Response Time: ≤ 15 milliseconds
Condition: New Aftermarket Replacement Component
Warranty: 12 Months

Introduction To MR985187 Air Flow MAF Sensor

MR-985187

En MR985187 is an OE-standard 4-pin drop-in Mass Air Flow (MAF) sensor featuring an integrated intake air temperature (IAT) sensor, Serving as a direct aftermarket replacement for MR985187 y E5T60171, this sensor is calibrated across a wide range of naturally aspirated, turbocharged, and V6 engine platforms. Key vehicle applications include for Mitsubishi Lancer (2008–2017 2.0L 4B11, 2.4L 4B12 & Ralliart/Evolution X Turbo), for Mitsubishi Outlander (2004–2013 2.4L 4G69 / 4B12 & 3.0L V6 6B31), for Mitsubishi Outlander Sport / ASX / RVR (2011–2019 2.0L/2.4L), for Mitsubishi Eclipse & Eclipse Spyder (2006–2012 2.4L 4G69 & 3.8L V6 6G75), for Mitsubishi Galant (2004–2012 2.4L / 3.8L), and for Mitsubishi Endeavor (2004–2011 3.8L V6).

The MR985187 utilizes micro-machined hot-film sensing technology paired with a fast-response NTC thermistor. By simultaneously measuring intake air mass volume and ambient intake air temperature, it delivers an ultra-precise linear analog output signal to the Engine Control Module (ECM). This real-time data enables the engine computer to compute exact air-fuel mixture ratios, manage variable valve timing (MIVEC), and adjust ignition advance curves.

Compatibilidad con vehículos y lista de referencias de equipo original

A continuación se incluye el alcance completo de la aplicación del vehículo y los números de referencia de piezas de equipo original intercambiables para tu consulta rápida.

Vehicle MakeModelo del vehículoAños de fabricaciónDesplazamiento
MitsubishiLancer2008–20172.0L / 2.4L
MitsubishiOutlander2004–20132.4L / 3.0L
MitsubishiOutlander Sport / ASX / RVR2011–20192.0L / 2.4L
MitsubishiEclipse / Eclipse Spyder2006–20122.4L / 3.8L
MitsubishiGalant2004–20122.4L / 3.8L
MitsubishiEndeavor2004–20113.8L
OE Part NumbersMR985187 / MR-985187 / E5T60171

Compliance Notice: All vehicle brand names, model designations, and engine codes listed below are referenced strictly to provide technical fitment and compatibility information.

Condiciones comerciales para la venta al por mayor

Cantidad mínima de pedido

Our MR985187 mass air flow maf sensor, standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.

Plazo de entrega

For all in-stock mass air flow maf sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 25 to 30 business days.

Política de garantía

Mass air flow maf sensor MR985187, come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.

Servicio de fabricación para terceros (OEM) y de marca blanca

Nuestros envases de marca se pueden personalizar en cuanto a tamaño, materias primas y procesos de envasado para satisfacer las necesidades de los distintos mercados regionales. Además, ofrecemos colaboraciones de producción flexibles y fiables para mayoristas, distribuidores, compradores al por mayor y empresas comerciales de todo el mundo. En resumen, ofrecemos un servicio integral de marca blanca, que incluye logotipos grabados con láser, etiquetas de producto personalizadas, bolsas de plástico selladas e impresión de cajas a color.

Fabricación para terceros y marcas blancas

Professional Installation Guidelines

  1. Safety Preparation: Turn off the engine ignition switch and disconnect the negative battery cable before servicing electrical intake components.
  2. Locate the Sensor: On for Mitsubishi Lancer, Outlander, and Eclipse, locate the MR985187 drop-in probe inserted into the air filter housing upper lid or the intake duct.
  3. Disconnect Harness: Depress the locking tab on the 4-pin electrical connector and carefully pull straight to disconnect.
  4. Remove Fasteners: Remove the two retaining screws securing the sensor flange. Gently twist and pull the probe straight out.
  5. Inspect & Clean Housing: Wipe clean the mounting bore in the air cleaner cover. Ensure the new Viton O-ring is properly seated in the sensor groove.
  6. Instalar nuevo sensor: Insert the new MR985187 probe straight into the mounting hole. Reinstall the two retaining screws and tighten securely (do not over-torque).
  7. Reconnect & ECU Reset: Push the 4-pin harness connector firmly until the lock tab clicks. Reconnect the battery terminal, start the engine, allow it to idle for 5–10 minutes to relearn fuel trim parameters, and clear historical OBD trouble codes using a diagnostic scan tool.

Centro de ayuda

PREGUNTAS FRECUENTES

Q1: What specific function does the MR985187 MAF sensor perform on for Mitsubishi MIVEC engines (such as 4B11, 4B12, and 6G75)?

For Mitsubishi MIVEC engines (2.0L 4B11, 2.4L 4B12, 3.8L 6G75) for Lancer, Outlander, Eclipse, and Galant, the MR985187 measures intake air mass and temp. The ECM uses this to calculate injection timing, optimize MIVEC, and manage ETCS. Drift causes air miscalculations, leading to sluggish acceleration, poor economy, and erratic idle.

MR985187 is a catalog part number for Mitsubishi, while E5T60171 is a production code printed on the sensor body. Both represent the same physical unit. They share the identical 4-pin blade terminal layout, mounting flange dimensions, bypass venturi structure, and voltage calibration curve.

  1. Always inspect the pre-installed Viton rubber O-ring to ensure it sits evenly in the probe flange groove. A pinched or missing O-ring will cause unmetered false air leaks and lean fuel trim codes.
  2. Insert the probe straight into the air cleaner housing mounting hole without forcing it against the plastic bore.
  3. Tighten the two retaining screws firmly by hand (do not over-tighten into the plastic housing).
  4. Inspect the engine air filter element; replace if it is contaminated or saturated with oil.
  • P0100: Mass Air Flow (MAF) Circuit Malfunction
  • P0101: Mass Air Flow (MAF) Circuit Range / Performance Problem
  • P0102: Mass Air Flow (MAF) Circuit Low Input
  • P0103: Mass Air Flow (MAF) Circuit High Input
  • P0112 / P0113: Intake Air Temperature (IAT) Sensor Circuit Low / High Input
  • P0171 / P0174: System Too Lean (Bank 1 / Bank 2)

Guías que puede necesitar

Productos relacionados

Send Us Your Inquiry

Share part numbers, quantities and target market — we reply within 24 hours.

Active JavaScript en su navegador para rellenar este formulario.

Your information is kept confidential and only used to reply to your inquiry.

GET A QUOTE

¿Tiene alguna otra pregunta que hacernos?

Talk to our sales team directly for pricing, fitment checks, samples and private-label packaging.

  • WhatsApp: +86-13450358058
  • Tel: +86-13450358058
  • Correo electrónico: jasmine@zhenhuaauto.com
  • Dirección: Guangyuan East Road, distrito de Tianhe, ciudad de Guangzhou, provincia de Guangdong, China

Vea lo que dicen nuestros clientes

El servicio de la empresa es muy práctico, debido a la calidad del servicio y los productos, he crecido con éxito en mi pequeña empresa, doy las gracias a su empresa, gracias a los empleados, especialmente a los chinos, gracias

5 estrellas
logotipo del cliente
Mark Benson

Las piezas del sistema del motor son de buena calidad y buena presentación, a buen precio. El aspecto más beneficioso de su empresa es el servicio de atención al cliente.

5 estrellas
logotipo del cliente
Jordi Ros

Sí, su empresa hace un gran trabajo y los vendedores se preocupan por sus clientes, así que su estilo hace que nuestro trabajo sea estupendo.

5 estrellas
logotipo del cliente
Pauline Dionne

Estoy muy agradecido a Zhenhua Auto Parts por ser mi socio comercial. Siempre me dan autopartes de alta calidad y sus suministros siempre están bien capacitados.
Son muy profesionales en la compra de autopartes y tienen una comunicación amigable con los clientes. Estoy muy satisfecho con su servicio.

5 estrellas
logotipo del cliente
Wilfredo Jiménez Jr

Estoy satisfecho con la atención que Zhenhuaautoparts. Brinda a sus clientes. Algo que me gusta mucho es el seguimiento que hacen cuando sale la mercancía. Es bueno. La calidad de las piezas del sistema de motor y del sistema de combustible es muy buena. Hasta ahora no he tenido ninguna queja de mis clientes. Pero siempre es bueno seguir mejorando.

5 estrellas
logotipo del cliente
Amanda Rieth

En cuanto a las autopartes profesionales que vende la empresa, certificó que son de la más alta calidad. La comercialización de los productos de su empresa ha reportado muy buenos beneficios a mi empresa, lo que se ha traducido en crecimiento. Estoy muy satisfecho con la vendedora y sus productos. Espero seguir haciéndolo. Negocios con ustedes por mucho tiempo, realmente gracias.

5 estrellas
logotipo del cliente
Jack

Equipo de autopartes YZHIDIANF

Aumentar el éxito de nuestros socios
Consigue más y mejores oportunidades con YZHIDIANF

  • Ahorro de tiempo y dinero

    Ahorro de tiempo y dinero

    Benefíciese de soluciones diseñadas por expertos para ahorrarle el máximo tiempo y dinero.

  • Más fiabilidad

    Más fiabilidad

    Obtenga sus recambios de fabricantes certificados para obtener resultados fiables en todo momento.

  • Wise Investments

    Wise Investments

    Deje en sus clientes una impresión duradera con soluciones diseñadas para el impacto y el reconocimiento de la marca.

  • Ser sostenible

    Ser sostenible

    Convertirnos en líderes del desarrollo sostenible en la industria de piezas de automóviles y adherirnos a principios respetuosos con el medio ambiente en todo el proceso, desde la producción y el embalaje hasta el transporte.

在此添加您的标题文本