Introduction to Crankshaft Position Sensor PC536 SU6230
The Crankshaft Position Sensor PC536 is a direct-fit OEM replacement for the 2001-2006 Hyundai Santa Fe 2.4L. It reads crankshaft position and rotational speed in real time, sending precise timing data to the ECU for accurate ignition and fuel delivery control. Manufactured to factory specifications under OE numbers PC536, SU6230, and 39310-38070, this Crankshaft Position Sensor drops into the original mounting location with no modifications. The sealed connector and high-temperature housing maintain stable signal output through cold starts, hot idle, and sustained highway operation.
Parameter Table of Crankshaft Position Sensor PC536 SU6230
| المعلمة | التفاصيل |
|---|---|
| رقم القطعة | PC536 |
| مرجع مرجعي | SU6230 / 39310-38070 |
| العلامة التجارية | YZHIDIANF |
| النوع | مستشعر موضع العمود المرفقي |
| تطبيقات المركبات | For 2001-2006 Hyundai Santa Fe 2.4L |
| ملاءمة المنتج | تركيب مباشر |
| إخراج الإشارة | الإشارة الرقمية |
| نوع الموصل | موصل مغلق وفقًا لمعايير الشركات المصنعة للمعدات الأصلية (OEM) |
| المواد | غلاف مقاوم للحرارة العالية مزود بنقاط تلامس مقاومة للتآكل |
| الضمان | ضمان لمدة 12 شهرًا |
| مدة التسليم | 3-7 أيام |
| شروط الدفع | التحويل المصرفي (T/T)، ويسترن يونيون، باي بال |
Why Choose Our Crankshaft Position Sensor PC536 SU6230
Direct Plug-and-Play Fit for the 2001-2006 Santa Fe 2.4L
The PC536 matches the original Crankshaft Position Sensor in mounting dimensions, connector shape, pinout, and electrical output. It fits the 2001-2006 Hyundai Santa Fe 2.4L with no rewiring, no adapter harnesses, and no modifications. Remove the old sensor, bolt this one in, reconnect the harness, done.
Triple Cross-Reference Coverage
This Crankshaft Position Sensor covers three OE and aftermarket part numbers: PC536, SU6230, and 39310-38070. One SKU replaces multiple part numbers for the 2001-2006 Santa Fe 2.4L, simplifying sourcing for workshops and distributors.
High-Precision Crankshaft Position Data
The sensing element captures crankshaft angle and rotational speed with tight tolerance from idle through redline. Clean, accurate data lets the ECU set fuel injection quantity and spark timing precisely under all load conditions. This Crankshaft Position Sensor holds its calibration over time, keeping timing accurate mile after mile.
Digital Signal Output for Fast ECU Communication
This Crankshaft Position Sensor outputs a digital signal rather than an analog waveform. Digital output means the ECU reads position data faster, with lower susceptibility to electrical noise from the ignition system or alternator. Clean communication keeps fuel trim and spark timing precise across all engine operating modes.
Built to Factory Specifications
Every PC536 is produced to OEM dimensional and electrical specs. The housing, connector, and internal electronics match the original Hyundai part. This Crankshaft Position Sensor works straight out of the box, without the fitment gaps or early failures common in generic replacements.
ضمان لمدة 12 شهرًا مع شحن عالمي سريع
Every Crankshaft Position Sensor PC536 ships within 3 to 7 days and is covered by a 12-month warranty against manufacturing defects. T/T, Western Union, and PayPal accepted.
