Introduction to Crankshaft Position Sensor 39180-04000
Bu Crankshaft Position Sensor 39180-04000 is designed to monitor crankshaft position and rotational speed, providing essential timing signals to the engine control unit (ECU). These signals help the engine control system coordinate ignition timing and fuel injection for reliable engine operation.
Identified by OE reference numbers 39180-04000 and 3918004000, this aftermarket replacement is intended for selected Kia Picanto applications. Before ordering, compare the OE number with your original sensor and confirm vehicle model, engine version, production year, connector configuration, and mounting compatibility to help ensure the correct fit. Contact our team for product details and fitment confirmation.
Crankshaft Position Sensor 39180-04000: Kia Picanto Fitment and OE Reference
The crankshaft position sensor 39180-04000 is listed for selected Kia Picanto II (TA) models equipped with 1.0L petrol engines. It monitors crankshaft position and rotational speed, sending signals to the engine control unit (ECU) to support ignition timing and fuel injection control.
When selecting a replacement, buyers should verify the OE reference numbers 39180-04000 and 3918004000 against the original component. Vehicle model, production year, engine version, electrical connector, and mounting design should also be checked before ordering. Refer to the fitment table below to review the listed vehicle application, and confirm compatibility if your vehicle configuration differs.
Changed Crankshaft Position Sensor? Check the OE Number and Fitment
If you have changed a crankshaft position sensor or are planning to replace a faulty unit, matching the correct part number is an important first step. The sensor may look similar to other aftermarket parts, but differences in connector configuration, cable arrangement, mounting points, or sensor dimensions can affect installation and compatibility.
For the Kia Picanto applications listed on this page, check whether OE number 39180-04000 or its reference number 3918004000 matches your original component. Confirm the vehicle’s model, production year, and engine specification before purchasing. If the original sensor has failed, it is also worth checking the connector, wiring, and related engine-management components to help identify the actual cause of the problem.
Crankshaft Position Sensor Symptoms and Replacement Cost
Common crankshaft position sensor symptoms include difficulty starting the engine, intermittent stalling, irregular engine operation, and an illuminated check-engine light. In some cases, an engine may fail to start if the ECU cannot receive a reliable crankshaft position signal. However, these symptoms can also be caused by wiring faults or other engine-management problems, so diagnosis is recommended before replacing the sensor.
The cost of replacing a crankshaft position sensor depends on the vehicle application, the replacement part selected, labor rates, and how accessible the sensor is. The total repair cost may include diagnostic work as well as the part and installation. For buyers sourcing crankshaft position sensor 39180-04000, confirming OE compatibility before ordering can help reduce the risk of purchasing an unsuitable replacement. Contact our team for product pricing and wholesale quotation details.
Benefits for Crankshaft Position Sensor Buyers
OE Reference
Use OE numbers 39180-04000 and 3918004000 to identify the replacement sensor. Confirm the connector and mounting design before ordering.
Vehicle Fitment Support
Verify the engine, connector and vehicle compatibility. Provide the VIN or engine code to confirm fitment for your Kia Picanto II (TA) 1.0L application.
Wholesale Order Support
Request a wholesale quotation by providing the OE number, required quantity, and destination country. Our team will help confirm product availability, vehicle compatibility, and pricing details.
Resmi Toptan Ticaret Koşulları
Minimum Sipariş Miktarı
The minimum order quantity is 10 pieces. Please confirm product availability and order requirements for crankshaft position sensor 39180-04000 / 3918004000 before placing your order.
Teslimat Süresi
The product page lists a delivery time of 3–7 days. Please contact our sales team to confirm stock availability and the estimated delivery schedule for your order.
Garanti Politikası
This product comes with a 12-month warranty. If you encounter a product quality issue, contact our team with your order details and supporting photos for review.
Ambalaj
Neutral packaging and branded packaging options are available. Contact us to confirm packaging methods, labeling requirements, and available customization options for your order.
Ulaşım
Available shipping options include UPS, DHL, and FedEx air freight. We can also coordinate shipment to your nominated freight forwarder. Shipping arrangements depend on your destination and order details.
Ödeme
Payment methods listed for this product include T/T, Western Union, and PayPal. Please confirm the accepted payment method and applicable terms with our sales team before placing your order.
OEM ve Özel Marka Hizmeti
Markalı ambalajlarımız, farklı bölgesel pazarların ihtiyaçlarını karşılamak üzere boyut, hammadde ve paketleme süreçleri açısından özelleştirilebilir. Ayrıca, küresel toptancılar, dağıtımcılar, toplu alıcılar ve ticaret şirketleri için esnek ve güvenilir üretim ortaklıkları sunuyoruz. Kısacası, lazerle kazınmış logolar, özelleştirilmiş ürün etiketleri, sızdırmaz plastik torbalar ve renkli kutu baskısı dahil olmak üzere tek elden özel etiket hizmeti sunuyoruz.
Otomobil Parçaları Fabrikamız Hakkında
2006 yılında kurulan YZHIDIANF, sensörler, yakıt enjektörleri, ateşleme bobinleri ve solenoid valfler dahil olmak üzere otomotiv elektronik bileşenleri ve motor parçaları konusunda uzmanlaşmış profesyonel bir üreticidir. 50’den fazla otomatik montaj hattıyla donatılmış, kendi ve iş ortaklarımıza ait onlarca üretim tesisimiz bulunmaktadır. Bu sayede aylık toplam üretim kapasitemiz 700.000 adedi aşabilmekte ve büyük hacimli siparişlerin taleplerini güvenilir bir şekilde karşılayabilmekteyiz.
Uluslararası Ürün Kalite Sertifikaları
Ürün kalite kontrolüne ve mevzuata uygunluğa büyük önem veriyoruz. Bu nedenle, IATF 16949 ve ISO 9001 kalite yönetim sistemi dahil olmak üzere, dünya çapında geçerliliği olan saygın sertifikaları aldık. Bu resmi sertifikalar, sadece otomotiv yedek parça sektöründeki profesyonel üretim kapasitemizi teyit etmekle kalmaz, aynı zamanda dünya çapındaki tüm toptan satış müşterilerimize sağlam kalite ve güvenlik garantileri sunar.
Yardım Merkezi
SSS
Q1: What Does a Crankshaft Position Sensor Do?
It helps the ECU determine engine speed and crankshaft position. A faulty sensor may cause starting difficulties, engine stalling, or irregular engine operation.
Q2: What Is a Crankshaft Position Sensor?
A crankshaft position sensor monitors crankshaft position and rotational speed, providing signals that help the engine control unit (ECU) coordinate ignition and fuel injection timing.
Q3:How Do You Check a Crankshaft Position Sensor?
Check for diagnostic trouble codes, inspect the sensor wiring and connector, and test the sensor signal according to the vehicle manufacturer’s service procedure. A fault code alone does not always confirm that the sensor needs replacement.
Q4:Where Is the Crankshaft Position Sensor Located?
The sensor is commonly located near the crankshaft pulley or the engine-transmission interface, depending on the engine design. Refer to the vehicle’s service manual to confirm the exact location.
Q5：How Do You Remove a Crankshaft Position Sensor?
Allow the engine to cool, disconnect the battery if required by the service procedure, unplug the sensor connector, and remove the retaining bolt. Follow the vehicle manufacturer’s instructions to avoid damaging the connector or mounting surface.
Q6：How Do You Replace a Crankshaft Position Sensor?
Verify the replacement part number and vehicle fitment, disconnect the electrical connector, remove the old sensor, and install the replacement according to the manufacturer’s procedure. Clear diagnostic codes if appropriate and verify engine operation afterward.
Q7：How Do You Install a Crankshaft Position Sensor?
Clean and inspect the mounting area, position the correct sensor properly, secure it using the specified fastening procedure, and reconnect the electrical connector. Follow the manufacturer’s torque and installation requirements.
Q8：How Do You Clean a Crankshaft Position Sensor?
Inspect the sensor for dirt, metal debris, connector damage, or oil contamination. Use a suitable cleaning method recommended by the manufacturer, and avoid damaging the sensing tip or electrical components. Replace the sensor if it is defective.
S9: Bir fabrika mısınız?
Evet, kendi fabrikamız var. Sanayi ve ticareti entegre eden bir şirketiz, bu nedenle fiyatımız ve kalitemiz çok avantajlı. İhtiyacınız olan otomobil parçalarını bana gönderebilirsiniz ve size en iyi fiyatı göndereceğim.
Related Guides
Motor ve Emisyon Sistemlerinde Nox Sensörünün İşlevi
Nox Sensörleri Motor Performansını Nasıl Etkiler?
İlgili Ürünler
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
