Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse - YZHIDIANF

Bize ücretsiz ulaşın:
Uzmanlarımızla 1 dakika içinde konuşun
1 saat içinde teklif verin

Şimdi Sorgula
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Son Güncelleme:2026-10-29

Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse

Özellikler
Product Category: Mass Air Flow Sensor (MAF)
OE Part Numbers: MR985187, MR-985187
Connector Configuration: 4-Pin Blade Terminal Socket
Mounting Configuration: Drop-In Probe Flange Mount
Operating Voltage Range: 9.0V – 16.0V DC
Operating Temperature Range: -40°C to +125°C (-40°F to +257°F)
Response Time: ≤ 15 milliseconds
Condition: New Aftermarket Replacement Component
Warranty: 12 Months

Introduction To MR985187 Air Flow MAF Sensor

MR-985187

Bu MR985187 is an OE-standard 4-pin drop-in Mass Air Flow (MAF) sensor featuring an integrated intake air temperature (IAT) sensor, Serving as a direct aftermarket replacement for MR985187 ve E5T60171, this sensor is calibrated across a wide range of naturally aspirated, turbocharged, and V6 engine platforms. Key vehicle applications include for Mitsubishi Lancer (2008–2017 2.0L 4B11, 2.4L 4B12 & Ralliart/Evolution X Turbo), for Mitsubishi Outlander (2004–2013 2.4L 4G69 / 4B12 & 3.0L V6 6B31), for Mitsubishi Outlander Sport / ASX / RVR (2011–2019 2.0L/2.4L), for Mitsubishi Eclipse & Eclipse Spyder (2006–2012 2.4L 4G69 & 3.8L V6 6G75), for Mitsubishi Galant (2004–2012 2.4L / 3.8L), and for Mitsubishi Endeavor (2004–2011 3.8L V6).

The MR985187 utilizes micro-machined hot-film sensing technology paired with a fast-response NTC thermistor. By simultaneously measuring intake air mass volume and ambient intake air temperature, it delivers an ultra-precise linear analog output signal to the Engine Control Module (ECM). This real-time data enables the engine computer to compute exact air-fuel mixture ratios, manage variable valve timing (MIVEC), and adjust ignition advance curves.

Araç Uyumluluğu ve Orijinal Ekipman Referans Listesi

Aşağıda, hızlı bir şekilde başvurabilmeniz için aracın uygulama kapsamının tamamı ve karşılığı olan orijinal ekipman (OE) parça numaraları yer almaktadır.

Vehicle MakeAraç ModeliModel YıllarıDeplasman
MitsubishiLancer2008–20172.0L / 2.4L
MitsubishiOutlander2004–20132.4L / 3.0L
MitsubishiOutlander Sport / ASX / RVR2011–20192.0L / 2.4L
MitsubishiEclipse / Eclipse Spyder2006–20122.4L / 3.8L
MitsubishiGalant2004–20122.4L / 3.8L
MitsubishiEndeavor2004–20113.8L
OE Part NumbersMR985187 / MR-985187 / E5T60171

Compliance Notice: All vehicle brand names, model designations, and engine codes listed below are referenced strictly to provide technical fitment and compatibility information.

Wholesale Trading Terms

Minimum Sipariş Miktarı

Our MR985187 mass air flow maf sensor, standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.

Teslimat Süresi

For all in-stock mass air flow maf sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 25 to 30 business days.

Garanti Politikası

Mass air flow maf sensor MR985187, come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.

OEM ve Özel Marka Hizmeti

Markalı ambalajlarımız, farklı bölgesel pazarların ihtiyaçlarını karşılamak üzere boyut, hammadde ve paketleme süreçleri açısından özelleştirilebilir. Ayrıca, küresel toptancılar, dağıtımcılar, toplu alıcılar ve ticaret şirketleri için esnek ve güvenilir üretim ortaklıkları sunuyoruz. Kısacası, lazerle kazınmış logolar, özelleştirilmiş ürün etiketleri, sızdırmaz plastik torbalar ve renkli kutu baskısı dahil olmak üzere tek elden özel etiket hizmeti sunuyoruz.

OEM ve Özel Marka

Professional Installation Guidelines

  1. Safety Preparation: Turn off the engine ignition switch and disconnect the negative battery cable before servicing electrical intake components.
  2. Locate the Sensor: On for Mitsubishi Lancer, Outlander, and Eclipse, locate the MR985187 drop-in probe inserted into the air filter housing upper lid or the intake duct.
  3. Disconnect Harness: Depress the locking tab on the 4-pin electrical connector and carefully pull straight to disconnect.
  4. Remove Fasteners: Remove the two retaining screws securing the sensor flange. Gently twist and pull the probe straight out.
  5. Inspect & Clean Housing: Wipe clean the mounting bore in the air cleaner cover. Ensure the new Viton O-ring is properly seated in the sensor groove.
  6. Yeni Sensör Takın: Insert the new MR985187 probe straight into the mounting hole. Reinstall the two retaining screws and tighten securely (do not over-torque).
  7. Reconnect & ECU Reset: Push the 4-pin harness connector firmly until the lock tab clicks. Reconnect the battery terminal, start the engine, allow it to idle for 5–10 minutes to relearn fuel trim parameters, and clear historical OBD trouble codes using a diagnostic scan tool.

Yardım Merkezi

SSS

Q1: What specific function does the MR985187 MAF sensor perform on for Mitsubishi MIVEC engines (such as 4B11, 4B12, and 6G75)?

For Mitsubishi MIVEC engines (2.0L 4B11, 2.4L 4B12, 3.8L 6G75) for Lancer, Outlander, Eclipse, and Galant, the MR985187 measures intake air mass and temp. The ECM uses this to calculate injection timing, optimize MIVEC, and manage ETCS. Drift causes air miscalculations, leading to sluggish acceleration, poor economy, and erratic idle.

MR985187 is a catalog part number for Mitsubishi, while E5T60171 is a production code printed on the sensor body. Both represent the same physical unit. They share the identical 4-pin blade terminal layout, mounting flange dimensions, bypass venturi structure, and voltage calibration curve.

  1. Always inspect the pre-installed Viton rubber O-ring to ensure it sits evenly in the probe flange groove. A pinched or missing O-ring will cause unmetered false air leaks and lean fuel trim codes.
  2. Insert the probe straight into the air cleaner housing mounting hole without forcing it against the plastic bore.
  3. Tighten the two retaining screws firmly by hand (do not over-tighten into the plastic housing).
  4. Inspect the engine air filter element; replace if it is contaminated or saturated with oil.
  • P0100: Mass Air Flow (MAF) Circuit Malfunction
  • P0101: Mass Air Flow (MAF) Circuit Range / Performance Problem
  • P0102: Mass Air Flow (MAF) Circuit Low Input
  • P0103: Mass Air Flow (MAF) Circuit High Input
  • P0112 / P0113: Intake Air Temperature (IAT) Sensor Circuit Low / High Input
  • P0171 / P0174: System Too Lean (Bank 1 / Bank 2)

İhtiyacınız Olabilecek Kılavuzlar

İlgili Ürünler

Send Us Your Inquiry

Share part numbers, quantities and target market — we reply within 24 hours.

Bu formu doldurmak için lütfen tarayıcınızda JavaScript'i etkinleştirin.

Your information is kept confidential and only used to reply to your inquiry.

GET A QUOTE

Bize başka sorularınız mı var?

Talk to our sales team directly for pricing, fitment checks, samples and private-label packaging.

Müşterilerimizin ne dediğini görün

Şirketin hizmeti çok pratik, hizmet ve ürünlerin kalitesi nedeniyle küçük işletmemde başarılı bir şekilde büyüdüm, şirketinize teşekkür ediyorum, çalışanlara, özellikle Çin halkına teşekkür ederim, teşekkür ederim

5 yıldız
müşteri logosu
Mark Benson

Motor sistemi parçaları kaliteli ve iyi bir sunumla iyi bir fiyata satılıyor. Şirketinizin en faydalı yönü müşteri hizmetleridir.

5 yıldız
müşteri logosu
Jordi Ros

Evet, şirketiniz harika bir iş çıkarıyor ve satış elemanları müşterilerini önemsiyor, bu nedenle tarzınız işimizi harika hale getiriyor.

5 yıldız
müşteri logosu
Pauline Dionne

Zhenhua Auto Parts'a iş ortağım olduğu için çok minnettarım. Bana her zaman yüksek kaliteli otomobil parçaları veriyorlar ve malzemeleri her zaman iyi eğitilmiş.
Otomobil parçaları satın alma konusunda çok profesyoneller ve müşterilerle dostça iletişim kuruyorlar. Hizmetlerinden son derece memnunum.

5 yıldız
müşteri logosu
Wilfredo Jimenez Jr

Zhenhuaautoparts'ın sağladığı ilgiden memnunum. Müşterilerine sağlıyor. Gerçekten sevdiğim bir şey, mallar çıktığında yaptıkları takip. Bu çok iyi. Motor sistemi parçalarının ve yakıt sistemi parçalarının kalitesi çok iyi. Şimdiye kadar müşterilerimden herhangi bir şikayet almadım. Ancak gelişmeye devam etmek her zaman iyidir.

5 yıldız
müşteri logosu
Amanda Rieth

Şirketin sattığı profesyonel otomobil parçaları ile ilgili olarak, bunların en yüksek kalitede olduğu belgelenmiştir. Şirketinizin ürünlerini pazarlamak şirketime çok iyi faydalar sağladı ve bu da büyümeye dönüştü. Satıcıdan ve ürünlerinden çok memnunum. Bunu yapmaya devam etmeyi umuyorum. Sizinle uzun süre iş yapmak için gerçekten teşekkür ederim.

5 yıldız
müşteri logosu
Jack

YZHIDIANF otomobil parçaları ekibi

Ortaklarımızı daha başarılı kılmak
YZHIDIANF ile daha fazla ve daha iyi fırsatlar yakalayın

  • Maliyet ve zamandan tasarruf edin

    Maliyet ve zamandan tasarruf edin

    Size mümkün olduğunca fazla zaman ve para kazandırmak için tasarlanmış, uzmanlıkla tasarlanmış çözümlerden yararlanın.

  • Daha fazla güvenilirlik

    Daha fazla güvenilirlik

    Her seferinde güvenilir sonuçlar için otomobil parçalarınızı sertifikalı üreticilerden alın.

  • Bilge Yatırımlar

    Bilge Yatırımlar

    Marka etkisi ve tanınırlığı için tasarlanmış çözümlerle müşterilerinizde kalıcı bir izlenim bırakın.

  • Sürdürülebilir olun

    Sürdürülebilir olun

    Otomobil parçaları sektöründe sürdürülebilir kalkınmada lider olmak ve üretimden paketlemeye ve nakliyeye kadar tüm süreçte çevre dostu ilkelere bağlı kalmak.

BU, BIR TÜR "IŞ".