Introduction to Coolant Temperature Sensor F6DZ-10884-AA
The YZHIDIANF engine coolant temperature sensor F6DZ-10884-AA is a direct OE replacement built for Ford, Mercury, Lincoln, and Mazda vehicles. Using an NTC thermistor element sealed in a corrosion-resistant housing, this coolant temperature sensor delivers real-time temperature readings to the ECU for accurate fuel enrichment, ignition timing adjustment, and cooling fan control. When the original sensor drifts or fails, symptoms like hard cold starts, rich fuel mixtures at operating temperature, and a check engine light with P0115–P0119 codes appear. Swapping in this plug-and-play coolant temperature sensor restores normal engine temperature monitoring and brings fuel economy back to factory levels.
Parameter Table of Coolant Temperature Sensor F6DZ-10884-AA
|
Parâmetro |
Detalhes |
|
Número da peça |
F6DZ-10884-AA |
|
Marca |
YZHIDIANF |
|
Tipo |
Sensor de temperatura do líquido de arrefecimento |
|
Vehicle Applications |
Ford / Mercury / Lincoln / Mazda |
|
Sensor Technology |
NTC thermistor |
|
Connector Type |
OEM-standard sealed connector with locking tab |
|
Housing Material |
High-strength corrosion-resistant engineering plastic |
|
Operating Temperature Range |
-40°C to 150°C (-40°F to 302°F) |
|
Response Time |
Instant signal transmission on temperature change |
|
Thread Size |
Standard OEM thread |
|
Garantia |
12 meses |
|
Prazo de entrega |
3–7 Days |
|
Payment Terms |
Transferência bancária (T/T), Western Union, PayPal |
Why Choose Our Coolant Temperature Sensor F6DZ-10884-AA
Accurate NTC Thermistor Output
The thermistor inside this coolant temperature sensor maintains tight resistance-to-temperature accuracy across the full operating range. The ECU uses this data to decide fuel enrichment during cold starts and fuel trim at operating temperature. A sensor that reads a few degrees off can make the engine run rich, wasting fuel and increasing emissions.
Built for Under-Hood Durability
The housing is molded from high-strength engineering plastic that withstands continuous exposure to coolant and engine bay heat. Internal contacts resist corrosion, and the sealed connector blocks moisture and debris. This coolant temperature sensor holds stable output through thousands of thermal cycles.
Fast Temperature Response
When coolant temperature changes, the sensor transmits the updated resistance value to the ECU without delay. Quick signal response keeps fuel mapping on target during warm-up and prevents the hesitation caused by stale temperature readings.
Direct OE Fit, No Modifications
Manufactured to the exact specification of Ford part F6DZ-10884-AA, this coolant temperature sensor screws into the original mounting location and plugs into the factory harness. No splicing, adapters, or ECU reprogramming required. Installation takes under 20 minutes.
12-Month Warranty
Every YZHIDIANF coolant temperature sensor ships with a 12-month warranty. Orders process within 24 hours and deliver in 3 to 7 business days via air freight.
