Introduction To MR547077 Mass Air Flow MAF Sensor


Bu MR547077 is a premium 5-pin drop-in Mass Air Flow (MAF) sensor. It features an integrated intake air temperature (IAT) sensor designed for Mitsubishi applications.
This sensor serves as a direct-fit replacement interchangeable with part numbers MR547077 ve 1525A016. It also cross-references codes 197400-2270, 197400-4030, and 197400-6020. It is widely used on renowned 4WD workhorses, including for Mitsubishi L200 / Triton (KB4T 2.5 DI-D) and for Mitsubishi Pajero / Montero / Shogun (V80 / V90 3.2 DI-D 4M41 & 3.8L V6 6G75). It is also compatible with for Mitsubishi Montero Sport / Challenger and for Mitsubishi Grandis.
Bu MR547077 integrates micro-machined hot-film air-mass metering circuitry. This is paired with an exposed fast-response NTC thermistor. It simultaneously senses intake charge volume and air temperature. The sensor then generates an ultra-precise linear analog output signal (0.5V to 4.5V DC) for the Engine Control Unit (ECU). This critical data allows the engine management system to regulate common-rail diesel injection timing, turbo boost pressure, and EGR rates.
It effectively resolves black exhaust smoke, sudden loss of acceleration, and excessive DPF soot accumulation. It also clears diagnostic trouble codes P0100, P0101, ve P0102.
Araç Uyumluluğu ve Orijinal Ekipman Referans Listesi
Aşağıda, hızlı bir şekilde başvurabilmeniz için aracın uygulama kapsamının tamamı ve karşılığı olan orijinal ekipman (OE) parça numaraları yer almaktadır.
| Vehicle Make | Araç Modeli | Model Yılları | Deplasman |
|---|---|---|---|
| Mitsubishi | L200 / Triton / Strada | 2005–2015 | 2.5L |
| Mitsubishi | L200 / Triton | 2006–2015 | 3.2L |
| Mitsubishi | Pajero / Montero / Shogun | 2006–2018 | 3.2L |
| Mitsubishi | Pajero / Montero / Shogun | 2006–2016 | 3.8L |
| Mitsubishi | Montero Sport / Pajero Sport | 2008–2016 | 2.5L / 3.2L |
| Mitsubishi | Challenger / Nativa | 2008–2015 | 2.5L / 3.2L |
| Mitsubishi | Grandis | 2004–2011 | 2,4 L |
| Mitsubishi | Outlander | 2003–2008 | 2.0L / 2.4L |
| OE Part Numbers | MR547077 / 1525A016 / MR-547077 / 197400-2270 / 197400-4030 / 197400-6020 | ||
Not: All vehicle brand names, model designations, and engine codes below are referenced strictly for technical fitment and compatibility verification.
Wholesale Trading Terms
Minimum Sipariş Miktarı
Our MR547077 mass air flow maf sensor, standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.
Teslimat Süresi
For all in-stock mass air flow maf sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 15 to 20 business days.
Garanti Politikası
MR547077 mass air flow maf sensor, come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.
Ambalaj
Varsayılan olarak, ambalajlama için standart nötr beyaz karton kutular kullanıyoruz. Ayrıca, özel ihtiyaçlarınıza göre özel renkli karton kutular veya markalı dış ambalajlar da üretebiliriz.
Ulaşım
DHL, FedEx ve UPS gibi önde gelen uluslararası kargo şirketleriyle iş birliği yapıyoruz. Bu sayede, neredeyse tüm ülkeleri ve bölgeleri kapsayan küresel kargo gönderim hizmetleri sunabiliyoruz.
Ödeme
Banka havalesi, PayPal ve Western Union gibi çeşitli güvenli ödeme yöntemlerini destekliyoruz. Uzun vadeli müşterilerimiz için esnek ödeme seçenekleri konusunda da anlaşma yapabiliriz.
Professional Installation Guidelines


- Safety Preparation: Turn off the engine ignition switch and disconnect the vehicle’s negative battery terminal before servicing electrical components.
- Locate the Sensor: On for Mitsubishi L200, Triton, and Pajero, locate the MR547077 drop-in probe inserted into the air cleaner housing cover or the upper intake duct.
- Disconnect Harness: Depress the center locking tab on the 5-pin electrical connector and carefully pull to disconnect.
- Remove Fasteners: Remove the two retaining screws securing the sensor flange. Gently twist and pull the probe straight out.
- Inspect & Clean Housing: Wipe clean the mounting bore in the air cleaner cover. Ensure the new Viton O-ring is seated in the sensor groove and lightly lubricated.
- Yeni Sensör Takın: Insert the new MR547077 probe straight into the mounting hole. Reinstall the two retaining screws and tighten securely (do not over-tighten into plastic).
- Reconnect & ECU Reset: Push the 5-pin harness connector firmly until the lock tab clicks. Reconnect the battery terminal, start the diesel/gasoline engine, allow it to idle for 5–10 minutes to relearn fuel trim parameters, and clear any historical OBD trouble codes using a diagnostic scan tool.
OEM ve Özel Marka Hizmeti
Markalı ambalajlarımız, farklı bölgesel pazarların ihtiyaçlarını karşılamak üzere boyut, hammadde ve paketleme süreçleri açısından özelleştirilebilir. Ayrıca, küresel toptancılar, dağıtımcılar, toplu alıcılar ve ticaret şirketleri için esnek ve güvenilir üretim ortaklıkları sunuyoruz. Kısacası, lazerle kazınmış logolar, özelleştirilmiş ürün etiketleri, sızdırmaz plastik torbalar ve renkli kutu baskısı dahil olmak üzere tek elden özel etiket hizmeti sunuyoruz.


Yardım Merkezi
SSS
Q1: Why are part numbers MR547077, 1525A016, and 197400-2270 / 197400-4030 completely interchangeable?
MR547077 and 1525A016 are interchangeable part numbers for Mitsubishi, with 1525A016 being the updated reference. 197400-2270 and 197400-4030 are cross-reference codes. They share identical 5-pin layouts, O-ring flange dimensions, internal hot-film electronics, and calibration curves.
Q1: What specific function does the MR547077 MAF sensor perform on for Mitsubishi common-rail diesel engines (4D56 / 4M41 DI-D)?
For Mitsubishi 2.5L 4D56 and 3.2L 4M41 DI-D engines, the MR547077 measures air mass and temp entering the turbo. The ECM uses this to calculate AFR, controlling rail pressure, injection timing, and VGT. If dirty or drifting, it miscalculates airflow, causing black smoke and DPF soot buildup.
Q3: What is your standard packaging and Minimum Order Quantity (MOQ)?
A: individual inner white/neutral box, and heavy-duty export master cartons. Custom brand packaging and private labeling are available for bulk orders. Standard MOQ is 10 pcs, with sample evaluation orders supported.

















