Wholesale Car Engine Parts 2-Pin Coolant Temperature Sensor PW911145 For Daf CF 75 XF 105 - YZHIDIANF

Kontaktieren Sie uns kostenlos:
Sprechen Sie mit unseren Experten in 1 Minute
Angebotserstellung innerhalb von 1 Stunde

Jetzt anfragen
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105
Zuletzt aktualisiert:2026-8-4

Großhandel Auto Motor Teile 2-Pin-Kühlmitteltemperatur-Sensor PW911145 für Daf CF 75 XF 105

Eigenschaften
Marke:YZHIDIANF
Typ:Kühlmitteltemperatursensor
OE NO.:PW911145
Applicable models:For Daf CF 75 XF 105
Garantie:12 Monate Garantie
Lieferzeit:3-7 Tage
Zahlung T/T. Western Union.paypal

Introduction to 2-Pin Coolant Temperature Sensor PW911145

PW911145 (6)

The YZHIDIANF 2-pin coolant temperature sensor PW911145 is a direct OE replacement for DAF CF 75 and XF 105 trucks. A heavy-duty NTC thermistor sealed in a corrosion-resistant housing feeds real-time coolant temperature to the engine ECU for fuel mapping, fan clutch engagement, and overheat protection. Trucks operating under sustained load put constant stress on the cooling system. A failing 2-pin coolant temperature sensor can trigger derating, excessive fuel consumption, or unnecessary fan lock-up, all of which eat into fleet uptime. This plug-and-play sensor restores accurate temperature data with no wiring changes and installs in minutes.

Parameter Table of 2-Pin Coolant Temperature Sensor PW911145

Parameter

Einzelheiten

Teil Nummer

PW911145

Marke

YZHIDIANF

Typ

2-Pin Coolant Temperature Sensor

Anwendungen im Fahrzeugbereich

DAF CF 75 / XF 105

Sensortechnik

2-pin NTC thermistor

Steckertyp

OEM-standard 2-pin sealed connector

Gehäusematerial

Hochfester, korrosionsbeständiger technischer Kunststoff

Betriebstemperaturbereich

-40 °C bis 150 °C (-40 °F bis 302 °F)

Thread Size

OEM standard

Garantie

12 Monate

Lieferfrist

3–7 Tage

Zahlungsbedingungen

T/T, Western Union, PayPal

Why Choose Our 2-Pin Coolant Temperature Sensor PW911145

Built for Heavy-Duty Thermal Cycling

Truck engines see wider temperature swings than passenger cars, from cold-soaked nights in a depot to sustained highway load. The thermistor and housing in this 2-pin coolant temperature sensor are specced to hold stable output through these extremes without signal drift.

Corrosion Protection for Fleet Service Life

The sealed connector body keeps road salt, pressure-washer water, and diesel grime away from the electrical contacts. Internals are corrosion-resistant. This matters on trucks that log half a million kilometers between major services.

OE Drop-In Fit

The sensor body, thread pitch, and connector shell match the DAF factory part. Pull the old sensor, thread in the new one, connect the plug. No drilling brackets, no splicing wires, no adapter harnesses.

Prevents False Overheat Derating

A sensor that reads hotter than actual coolant temperature forces the ECU into protective derating. Engine power is cut even though nothing is wrong. This unit outputs the correct resistance so the ECU makes fan and fuel decisions based on real data.

Fleet-Ready Batch Consistency

Each production lot is tested at multiple temperature checkpoints against the OE resistance curve. Units that fall outside tolerance are rejected. When you order a batch for fleet stock, you get consistent parts that behave the same way across multiple trucks.

12 Monate Garantie

Every YZHIDIANF 2-pin coolant temperature sensor includes a 12-month warranty against manufacturing defects. Orders ship within 24 hours and deliver in 3 to 7 business days.

Hilfe-Center

FAQ

Q1: Will an engine derate caused by a bad 2-pin coolant temperature sensor clear itself after replacing the sensor?
A1: Yes. Once the new sensor is installed and the ECU sees a plausible temperature signal, derating stops on the next key cycle. You may still need to clear stored fault codes with a diagnostic tool, but the protective power reduction lifts immediately once the ECU receives valid data.
A2: These sensors are not on a fixed replacement interval. They last until the thermistor element drifts or the connector corrodes. That said, if a truck in the fleet hits 500,000 km with the original sensor and begins showing intermittent P0115 codes or fan lock-up, swapping it preemptively avoids a roadside derate. At the cost of a sensor versus the cost of a loaded truck sitting on the shoulder, it is a cheap insurance policy.
A3:Back-probe the sensor connector with a multimeter set to resistance. At approximately 20°C ambient, a healthy PW911145 reads in the 2,000–3,000 ohm range. Start the engine and watch the resistance. It should drop steadily as coolant temperature rises. A reading that jumps around, stays fixed, or shows open circuit means the sensor needs replacement. Compare the scan tool live data to the multimeter reading. If the ECU reports -40°C and the multimeter shows 2,500 ohms, the wiring or ECU is at fault, not the sensor.

Leitfäden, die Sie brauchen könnten

Verwandte Produkte

Haben Sie weitere Fragen an uns?

Bitte aktivieren Sie JavaScript in Ihrem Browser, um dieses Formular auszufüllen.

 

 

ce-Symbol

Sehen Sie, was unsere Kunden sagen

Der Service des Unternehmens ist sehr praktisch, aufgrund der Qualität des Service und der Produkte, habe ich erfolgreich in meinem kleinen Unternehmen gewachsen, ich danke Ihrem Unternehmen, danke an die Mitarbeiter, vor allem die Chinesen, ich danke Ihnen

5 Sterne
Kundenlogo
Mark Benson

Die Teile des Motorsystems sind von guter Qualität und guter Präsentation, zu einem guten Preis. Der vorteilhafteste Aspekt Ihres Unternehmens ist der Kundenservice.

5 Sterne
Kundenlogo
Jordi Ros

Ja, Ihr Unternehmen leistet großartige Arbeit, und die Vertriebsmitarbeiter kümmern sich um ihre Kunden, so dass Ihr Stil unsere Arbeit bereichert.

5 Sterne
Kundenlogo
Pauline Dionne

Ich bin Zhenhua Auto Parts sehr dankbar, dass sie mein Geschäftspartner sind. Sie geben mir immer qualitativ hochwertige Autoteile und ihre Lieferungen sind immer gut ausgebildet.
Sie sind sehr professionell beim Kauf von Autoteilen und haben eine freundliche Kommunikation mit den Kunden. Ich bin sehr zufrieden mit ihrem Service.

5 Sterne
Kundenlogo
Wilfredo Jimenez Jr.

Ich bin zufrieden mit der Aufmerksamkeit, die Zhenhuaautoparts bietet. Es bietet seinen Kunden. Was mir wirklich gefällt, ist die Nachbetreuung, wenn die Ware geliefert wird. Das ist gut. Die Qualität der Teile für das Motorsystem und das Kraftstoffsystem ist sehr gut. Bis jetzt habe ich noch keine Beschwerden von meinen Kunden erhalten. Aber es ist immer gut, sich weiter zu verbessern.

5 Sterne
Kundenlogo
Amanda Rieth

Was die professionellen Autoteile angeht, die das Unternehmen verkauft, so bescheinigt es, dass sie von höchster Qualität sind. Die Vermarktung der Produkte Ihres Unternehmens hat meinem Unternehmen sehr gute Vorteile gebracht, die sich in Wachstum niedergeschlagen haben. Ich bin sehr zufrieden mit der Verkäuferin und ihren Produkten. Ich hoffe, dies auch weiterhin tun zu können. Business mit Ihnen für eine lange Zeitwirklich danken Ihnen.

5 Sterne
Kundenlogo
Jack

YZHIDIANF Autoteile-Team

Unsere Partner erfolgreicher machen
Erhalten Sie mehr und bessere Möglichkeiten mit YZHIDIANF

  • Kosten und Zeit sparen

    Kosten und Zeit sparen

    Profitieren Sie von fachmännisch ausgearbeiteten Lösungen, die Ihnen so viel Zeit und Geld wie möglich sparen.

  • Mehr Zuverlässigkeit

    Mehr Zuverlässigkeit

    Beziehen Sie Ihre Autoteile von zertifizierten Herstellern, um stets zuverlässige Ergebnisse zu erzielen.

  • Kluge Investitionen

    Kluge Investitionen

    Hinterlassen Sie bei Ihren Kunden einen bleibenden Eindruck mit Lösungen, die auf Markenwirkung und Wiedererkennung ausgelegt sind.

  • Nachhaltig werden

    Nachhaltig werden

    Führend in der nachhaltigen Entwicklung in der Autoteileindustrie werden und umweltfreundliche Prinzipien im gesamten Prozess von der Produktion über die Verpackung bis zum Transport einhalten.

在此添加您的标题文本