Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse - YZHIDIANF

Kontaktieren Sie uns kostenlos:
Sprechen Sie mit unseren Experten in 1 Minute
Angebotserstellung innerhalb von 1 Stunde

Jetzt anfragen
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse
Zuletzt aktualisiert:2026-10-29

Air Flow Sensor MR985187 for Mitsubishi Lancer Outlander Eclipse

Eigenschaften
Product Category: Mass Air Flow Sensor (MAF)
OE Part Numbers: MR985187, MR-985187
Connector Configuration: 4-Pin Blade Terminal Socket
Mounting Configuration: Drop-In Probe Flange Mount
Operating Voltage Range: 9.0V – 16.0V DC
Operating Temperature Range: -40°C to +125°C (-40°F to +257°F)
Response Time: ≤ 15 milliseconds
Condition: New Aftermarket Replacement Component
Warranty: 12 Months

Introduction To MR985187 Air Flow MAF Sensor

MR-985187

Die MR985187 is an OE-standard 4-pin drop-in Mass Air Flow (MAF) sensor featuring an integrated intake air temperature (IAT) sensor, Serving as a direct aftermarket replacement for MR985187 und E5T60171, this sensor is calibrated across a wide range of naturally aspirated, turbocharged, and V6 engine platforms. Key vehicle applications include for Mitsubishi Lancer (2008–2017 2.0L 4B11, 2.4L 4B12 & Ralliart/Evolution X Turbo), for Mitsubishi Outlander (2004–2013 2.4L 4G69 / 4B12 & 3.0L V6 6B31), for Mitsubishi Outlander Sport / ASX / RVR (2011–2019 2.0L/2.4L), for Mitsubishi Eclipse & Eclipse Spyder (2006–2012 2.4L 4G69 & 3.8L V6 6G75), for Mitsubishi Galant (2004–2012 2.4L / 3.8L), and for Mitsubishi Endeavor (2004–2011 3.8L V6).

The MR985187 utilizes micro-machined hot-film sensing technology paired with a fast-response NTC thermistor. By simultaneously measuring intake air mass volume and ambient intake air temperature, it delivers an ultra-precise linear analog output signal to the Engine Control Module (ECM). This real-time data enables the engine computer to compute exact air-fuel mixture ratios, manage variable valve timing (MIVEC), and adjust ignition advance curves.

Fahrzeugkompatibilität und Liste der Originalausrüstungsteile

Nachstehend finden Sie den vollständigen Anwendungsbereich für Fahrzeuge sowie die entsprechenden OE-Teilenummern zur schnellen Orientierung.

Vehicle MakeFahrzeugmodellModelljahreVerdrängung
MitsubishiLancer2008–20172.0L / 2.4L
MitsubishiOutlander2004–20132.4L / 3.0L
MitsubishiOutlander Sport / ASX / RVR2011–20192.0L / 2.4L
MitsubishiEclipse / Eclipse Spyder2006–20122.4L / 3.8L
MitsubishiGalant2004–20122.4L / 3.8L
MitsubishiEndeavor2004–20113.8L
OE Part NumbersMR985187 / MR-985187 / E5T60171

Compliance Notice: All vehicle brand names, model designations, and engine codes listed below are referenced strictly to provide technical fitment and compatibility information.

Geschäftsbedingungen für den Großhandel

Mindestbestellmenge

Our MR985187 mass air flow maf sensor, standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.

Lieferfrist

For all in-stock mass air flow maf sensor, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 25 to 30 business days.

Garantiebestimmungen

Mass air flow maf sensor MR985187, come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.

OEM- und Eigenmarkenservice

Unsere Markenverpackungen lassen sich hinsichtlich Größe, Rohstoffen und Verpackungsprozessen individuell anpassen, um den Anforderungen verschiedener regionaler Märkte gerecht zu werden. Darüber hinaus bieten wir flexible und zuverlässige Produktionspartnerschaften für globale Großhändler, Distributoren, Großabnehmer und Handelsunternehmen an. Kurz gesagt: Wir bieten einen Private-Label-Service aus einer Hand, einschließlich lasergravierter Logos, individueller Produktetiketten, versiegelter Plastiktüten und des Bedruckens von Farbkartons.

OEM & Eigenmarken

Professional Installation Guidelines

  1. Safety Preparation: Turn off the engine ignition switch and disconnect the negative battery cable before servicing electrical intake components.
  2. Locate the Sensor: On for Mitsubishi Lancer, Outlander, and Eclipse, locate the MR985187 drop-in probe inserted into the air filter housing upper lid or the intake duct.
  3. Disconnect Harness: Depress the locking tab on the 4-pin electrical connector and carefully pull straight to disconnect.
  4. Remove Fasteners: Remove the two retaining screws securing the sensor flange. Gently twist and pull the probe straight out.
  5. Inspect & Clean Housing: Wipe clean the mounting bore in the air cleaner cover. Ensure the new Viton O-ring is properly seated in the sensor groove.
  6. Neuen Sensor einbauen: Insert the new MR985187 probe straight into the mounting hole. Reinstall the two retaining screws and tighten securely (do not over-torque).
  7. Reconnect & ECU Reset: Push the 4-pin harness connector firmly until the lock tab clicks. Reconnect the battery terminal, start the engine, allow it to idle for 5–10 minutes to relearn fuel trim parameters, and clear historical OBD trouble codes using a diagnostic scan tool.

Hilfe-Center

FAQ

Q1: What specific function does the MR985187 MAF sensor perform on for Mitsubishi MIVEC engines (such as 4B11, 4B12, and 6G75)?

For Mitsubishi MIVEC engines (2.0L 4B11, 2.4L 4B12, 3.8L 6G75) for Lancer, Outlander, Eclipse, and Galant, the MR985187 measures intake air mass and temp. The ECM uses this to calculate injection timing, optimize MIVEC, and manage ETCS. Drift causes air miscalculations, leading to sluggish acceleration, poor economy, and erratic idle.

MR985187 is a catalog part number for Mitsubishi, while E5T60171 is a production code printed on the sensor body. Both represent the same physical unit. They share the identical 4-pin blade terminal layout, mounting flange dimensions, bypass venturi structure, and voltage calibration curve.

  1. Always inspect the pre-installed Viton rubber O-ring to ensure it sits evenly in the probe flange groove. A pinched or missing O-ring will cause unmetered false air leaks and lean fuel trim codes.
  2. Insert the probe straight into the air cleaner housing mounting hole without forcing it against the plastic bore.
  3. Tighten the two retaining screws firmly by hand (do not over-tighten into the plastic housing).
  4. Inspect the engine air filter element; replace if it is contaminated or saturated with oil.
  • P0100: Mass Air Flow (MAF) Circuit Malfunction
  • P0101: Mass Air Flow (MAF) Circuit Range / Performance Problem
  • P0102: Mass Air Flow (MAF) Circuit Low Input
  • P0103: Mass Air Flow (MAF) Circuit High Input
  • P0112 / P0113: Intake Air Temperature (IAT) Sensor Circuit Low / High Input
  • P0171 / P0174: System Too Lean (Bank 1 / Bank 2)

Leitfäden, die Sie brauchen könnten

Verwandte Produkte

Send Us Your Inquiry

Share part numbers, quantities and target market — we reply within 24 hours.

Bitte aktivieren Sie JavaScript in Ihrem Browser, um dieses Formular auszufüllen.

Your information is kept confidential and only used to reply to your inquiry.

GET A QUOTE

Haben Sie weitere Fragen an uns?

Talk to our sales team directly for pricing, fitment checks, samples and private-label packaging.

Sehen Sie, was unsere Kunden sagen

Der Service des Unternehmens ist sehr praktisch, aufgrund der Qualität des Service und der Produkte, habe ich erfolgreich in meinem kleinen Unternehmen gewachsen, ich danke Ihrem Unternehmen, danke an die Mitarbeiter, vor allem die Chinesen, ich danke Ihnen

5 Sterne
Kundenlogo
Mark Benson

Die Teile des Motorsystems sind von guter Qualität und guter Präsentation, zu einem guten Preis. Der vorteilhafteste Aspekt Ihres Unternehmens ist der Kundenservice.

5 Sterne
Kundenlogo
Jordi Ros

Ja, Ihr Unternehmen leistet großartige Arbeit, und die Vertriebsmitarbeiter kümmern sich um ihre Kunden, so dass Ihr Stil unsere Arbeit bereichert.

5 Sterne
Kundenlogo
Pauline Dionne

Ich bin Zhenhua Auto Parts sehr dankbar, dass sie mein Geschäftspartner sind. Sie geben mir immer qualitativ hochwertige Autoteile und ihre Lieferungen sind immer gut ausgebildet.
Sie sind sehr professionell beim Kauf von Autoteilen und haben eine freundliche Kommunikation mit den Kunden. Ich bin sehr zufrieden mit ihrem Service.

5 Sterne
Kundenlogo
Wilfredo Jimenez Jr.

Ich bin zufrieden mit der Aufmerksamkeit, die Zhenhuaautoparts bietet. Es bietet seinen Kunden. Was mir wirklich gefällt, ist die Nachbetreuung, wenn die Ware geliefert wird. Das ist gut. Die Qualität der Teile für das Motorsystem und das Kraftstoffsystem ist sehr gut. Bis jetzt habe ich noch keine Beschwerden von meinen Kunden erhalten. Aber es ist immer gut, sich weiter zu verbessern.

5 Sterne
Kundenlogo
Amanda Rieth

Was die professionellen Autoteile angeht, die das Unternehmen verkauft, so bescheinigt es, dass sie von höchster Qualität sind. Die Vermarktung der Produkte Ihres Unternehmens hat meinem Unternehmen sehr gute Vorteile gebracht, die sich in Wachstum niedergeschlagen haben. Ich bin sehr zufrieden mit der Verkäuferin und ihren Produkten. Ich hoffe, dies auch weiterhin tun zu können. Business mit Ihnen für eine lange Zeitwirklich danken Ihnen.

5 Sterne
Kundenlogo
Jack

YZHIDIANF Autoteile-Team

Unsere Partner erfolgreicher machen
Erhalten Sie mehr und bessere Möglichkeiten mit YZHIDIANF

  • Kosten und Zeit sparen

    Kosten und Zeit sparen

    Profitieren Sie von fachmännisch ausgearbeiteten Lösungen, die Ihnen so viel Zeit und Geld wie möglich sparen.

  • Mehr Zuverlässigkeit

    Mehr Zuverlässigkeit

    Beziehen Sie Ihre Autoteile von zertifizierten Herstellern, um stets zuverlässige Ergebnisse zu erzielen.

  • Kluge Investitionen

    Kluge Investitionen

    Hinterlassen Sie bei Ihren Kunden einen bleibenden Eindruck mit Lösungen, die auf Markenwirkung und Wiedererkennung ausgelegt sind.

  • Nachhaltig werden

    Nachhaltig werden

    Führend in der nachhaltigen Entwicklung in der Autoteileindustrie werden und umweltfreundliche Prinzipien im gesamten Prozess von der Produktion über die Verpackung bis zum Transport einhalten.

在此添加您的标题文本