Introduction to 036906051 MAP Sensor
The 036906051 Intake Manifold Absolute Pressure (MAP) sensor is a direct-fit replacement component engineered for Volkswagen Group (VAG) vehicles powered by 1.2L, 1.4L, and 1.6L engines. This sensor continuously monitors the pressure inside the intake manifold and transmits real-time data to the engine control unit (ECU), enabling precise calculation of air density and air mass flow rate. Accurate MAP readings are essential for correct fuel injection quantity, ignition timing, and overall engine efficiency.
This sensor is supplied with an integrated air temperature sensor, combining two critical measurements into a single OE-matched housing. It is manufactured to original equipment specifications and is suitable for both petrol and certain diesel applications for Audi vehicles, for SEAT vehicles, for Škoda vehicles, and for Volkswagen vehicles
Fahrzeugkompatibilität und Liste der Originalausrüstungsteile
Nachstehend finden Sie den vollständigen Anwendungsbereich für Fahrzeuge sowie die entsprechenden OE-Teilenummern zur schnellen Orientierung.
| Fahrzeugmarke | Fahrzeugmodell | Modelljahre | Verdrängung |
|---|---|---|---|
| VW | Golf IV / Golf Variant | 1997–2005 | 1.4L / 1.6L |
| VW | Bora / Bora Variant | 1998–2005 | 1.4L / 1.6L |
| VW | Polo III / Polo IV / Polo V | 1999–2012 | 1.2L / 1.4L |
| VW | Lupo | 1998–2005 | 1.0L / 1.4L / 1.6L |
| VW | Caddy II / Caddy III | 2000–2010 | 1.4L |
| VW | Fox | 2005–2011 | 1.2L / 1.4L |
| VW | New Beetle | 2001–2010 | 1.4L |
| Audi | A2 | 2000–2005 | 1.4L |
| Seat | Ibiza II / Ibiza III / Ibiza IV | 1999–2011 | 1.2L / 1.4L / 1.6L |
| Seat | Cordoba | 1999–2009 | 1.2L / 1.4L / 1.6L |
| Seat | Leon | 1999–2006 | 1.4L / 1.6L |
| Seat | Toledo II | 1999–2006 | 1.4L / 1.6L |
| Seat | Arosa | 1997–2004 | 1.0L / 1.4L |
| Seat | Inca | 2000–2003 | 1.4L |
| Skoda | Fabia I / Fabia II | 1999–2014 | 1.2L / 1.4L / 1.6L |
| Skoda | Octavia I | 2000–2010 | 1.4L |
| Skoda | Roomster / Praktik | 2006–2015 | 1.2L / 1.4L |
| Skoda | Felicia I / Felicia II | 1995–2001 | 1.3L / 1.6L |
| Referenz-Teilenummer | 036906051 / 036 906 051 / 036906051D / 036 906 051 D / 03D906051 / 03D 906 051 / 0279980411 / 0369980411 | ||
*Disclaimer: Vehicle make and model names are listed strictly to demonstrate part compatibility. Always verify original part numbers (e.g., 036906051 or 036906051D) or vehicle VIN prior to purchase.
Geschäftsbedingungen für den Großhandel
Mindestbestellmenge
Our 036906051 map sensor standard minimum MOQ is 10 pieces per model. We also accept mixed orders of different sensor models to meet your diverse sourcing needs.
Lieferfrist
For all in-stock map sensors, we can arrange shipment within 3-7 business days. For large-volume wholesale orders, the production and delivery cycle is approximately 15 to 20 business days.
Garantiebestimmungen
036906051 map sensor come with a 12-month OE-quality warranty. If any manufacturing defect occurs within the warranty period, send us a video and we’ll offer a free return or exchange.
Verpackung
Standardmäßig verwenden wir für die Verpackung neutrale, weiße Kartons. Darüber hinaus können wir je nach Ihren individuellen Anforderungen Kartons in Sonderfarben oder mit Ihrem Markenlogo versehene Umverpackungen herstellen.
Verkehr
Wir arbeiten mit großen internationalen Kurierdiensten wie DHL, FedEx und UPS zusammen. Daher können wir weltweiten Versand anbieten, der nahezu alle Länder und Regionen abdeckt.
Zahlung
Wir unterstützen eine Vielzahl sicherer Zahlungsmethoden, darunter Banküberweisungen, PayPal und Western Union. Für Langzeitkunden können wir zudem flexible Zahlungsmodalitäten vereinbaren.
OEM- und Eigenmarkenservice
Unsere Markenverpackungen lassen sich hinsichtlich Größe, Rohstoffen und Verpackungsprozessen individuell anpassen, um den Anforderungen verschiedener regionaler Märkte gerecht zu werden. Darüber hinaus bieten wir flexible und zuverlässige Produktionspartnerschaften für globale Großhändler, Distributoren, Großabnehmer und Handelsunternehmen an. Kurz gesagt: Wir bieten einen Private-Label-Service aus einer Hand, einschließlich lasergravierter Logos, individueller Produktetiketten, versiegelter Plastiktüten und des Bedruckens von Farbkartons.


Richtlinien für die fachgerechte Installation
- Safety First: Turn off the ignition, remove the key, and disconnect the vehicle’s negative battery terminal before disconnecting any engine wiring harness.
- Sensor lokalisieren: On for VW, for Audi, for Seat, and for Skoda 1.4L 16V and 1.2L engines, locate the MAP sensor fastened directly to the side or top of the intake manifold runner.
- Unharness & Unbolt: Gently release the plastic wiring harness locking tab to disconnect the 4-pin electrical connector. Remove the two retaining mounting screws.
- Inspect & Clean the Port: Gently pull out the old sensor. Inspect the mounting cavity for oil sludge or carbon buildup; clean the mating surface with sensor-safe cleaner and a lint-free cloth.
- Neuen Sensor einbauen: Ensure the new fluororubber O-ring is properly seated in its groove on the probe. Lightly lubricate the O-ring with a drop of clean engine oil, insert the sensor squarely into the port, and tighten the two mounting screws evenly (torque to approx. 3.5 – 5.0 Nm).
- Erneut anschließen und Fehlercodes löschen: Reconnect the 4-pin harness until you hear a secure click. Reconnect the battery, start the engine, verify smooth idle, and clear historical DTCs using an OBD-II diagnostic scanner.
Hilfe-Center
FAQ
Q1: How does the 036906051 sensor integrate both MAP and IAT functions through its 4-pin connector?
A: The 036906051 is a dual-function combined sensor. Instead of utilizing two separate sensors on the intake runner, it combines a piezoresistive silicon pressure element (MAP) and an NTC thermistor (IAT) inside one probe.
Q2: Which OBD-II diagnostic trouble codes (DTCs) indicate a failing 036906051 sensor?
A: faulty 036906051 sensor commonly sets P0105–P0108 (MAP circuit/range/low/high) and P0112/P0113 (IAT circuit low/high). Symptoms include rough idle, stalling at stops, delayed throttle response, high fuel consumption, rich exhaust odor, and EPC / Check Engine Light.
Q3: Does replacing the 036906051 sensor require throttle body realignment or ECU adaptation via diagnostic tools?
A: While the 036906051 sensor is an electrical plug-and-play component that works immediately upon connection, modern VAG ECUs store long-term fuel trim (LTFT) and idle control adaptation values. If the engine has been running with a corrupted MAP reading for an extended period, performing an ECU memory reset (clearing fault codes) and an Electronic Throttle Body Basic Setting / Alignment (using VCDS / OBD scanner on Group 060 or Group 098) will ensure a smooth idle and instant driving recovery.
Frage 4: Wie sieht Ihre Standardverpackung aus und wie hoch ist die Mindestbestellmenge (MOQ)?
A: Einzelverpackung in einem weißen/neutralen Karton sowie strapazierfähige Export-Umkartons. Bei Großbestellungen sind maßgeschneiderte Markenverpackungen und Private-Label-Lösungen möglich. Die Standard-Mindestbestellmenge beträgt 10 Stück; Bestellungen zur Musterprüfung sind möglich.















